Мануал для bmw s1000rr

1. Manuals
2. Brands
3. BMW Manuals
4. Motorcycle
5. S 1000 RR —
6. Rider’s manual

• Page 1
  BMW Motorrad The Ultimate Riding Machine bmw‑motorrad.com Rider’s Manual (US Model) S 1000 RR…
• Page 2
  Motorcycle/Retailer Data Motorcycle Data Retailer Data Model Contact in Service Ms./Mr. Vehicle identification number Phone number Color number Initial registration Retailer’s address/phone number (com- License plate pany stamp)
• Page 3
  BMW motorcycle owners and riders. Familiarize yourself with Should you want to sell your your new motorcycle so that you BMW one day, please also re- can ride it safely and confidently member to turn over the Ride’s in all highway traffic situations.

• Page 4: Table Of Contents

  Table of Contents 3 Displays ….21 Cruise control ….55 Indicator and warning Speed warning .

• Page 5
  RACE INFO ….101 BMW Motorrad (DTC) ….. 143 SETUP MENU .
• Page 6
  Reporting safety defects ….214 BMW Motorrad Service . . . 215 BMW Motorrad Mobility Services ….215 Maintenance proce- dures .

• Page 7: General Instructions

  General instructions Overview ……6 Abbreviations and symbols ..6 Equipment .

• Page 8: Overview

  When the time comes to sell claims may be denied as a result. your BMW, please remember NOTICE Special informa- National-market version. to hand over this Rider’s Manual; tion on operating and in- it is an important part of the mo- Optional extra.

• Page 9: Equipment

  Dynamic Traction Con- If your BMW was supplied with and accessories. For this reason, trol. equipment not described in some aspects of your motorcycle…

• Page 10
  on the data, illustrations or de- scriptions in this manual.

• Page 11: Overviews

  Overviews General view, left side ….11 General view left side with DDC ..13 General view, right side … . . 15 Underneath seat .

• Page 13: General View, Left Side

  General view, left side Adjuster for spring preload, front ( Adjusting front compres- sion damping (red scale) Adjusting rear compres- sion damping (red scale) Adjuster for spring preload, rear ( Hump cover lock ( Seat lock ( Tire inflation pressure table Load capacity table Chain adjustment values Engine oil level indicator…

• Page 15: General View Left Side With Ddc

  General view left side with DDC with Dynamic Damping Control (DDC) Adjust spring preload on front wheel ( 69). Hump cover lock ( Seat lock ( Tire inflation pressure table Load capacity table Chain adjustment values Adjuster for spring preload, rear ( Engine oil level indicator 155)

• Page 17: General View, Right Side

  General view, right side Brake-fluid reservoir, rear 160) Vehicle identification num- ber and type plate (on steering head at right) Brake-fluid reservoir, front 159) Adjusting rebound-stage damping without Dynamic Damp- ing Control (DDC) Rebound-stage damping on front wheel ( 73). Adjust steering damper Checking coolant level 162)

• Page 18: Underneath Seat

  Underneath seat Battery ( 181) Helmet holder ( Rider’s Manual (US Model) Fuse box ( 183) Tool kit ( 152) Diagnostic connector 185)

• Page 19: Multifunction Switch, Left

  Multifunction switch, left Deactivating DTC ( Deactivate ABS ( with ABS Pro Switching off ABS Pro High-beam headlight and headlight flasher ( Start time recording Cruise control ( Hazard warning lights sys- tem ( Adjusting DTC ( 125) Turn indicators ( Horn Set clock ( Resetting trip odometer…

• Page 20: Right

  Multifunction switch, right Heated handlebar grips Selecting riding mode Emergency on/off switch (kill switch) ( Starter button Starting engine ( Launch Control ( 126) Speed limiter for pit lane 128)

• Page 21: Instrument Panel

  Instrument panel Indicator and warning light fields ( Tachometer Shiftpoint light ( Photosensor (for adjusting brightness of instrument lighting) with anti-theft alarm sys- tem (DWA) DWA LED ( Multifunction display…

• Page 23: Displays

  Displays Indicator and warning lights ..22 Multifunction display ….23 ABS Pro display ….24 Warning lights .

• Page 24: Indicator And Warning Lights

  Indicator and warning lights DTC ( ABS ( Turn indicator, left Universal warning light, ap- pears together with indica- tor lights in the multifunc- tion display ( Turn indicator, right Fuel reserve ( Neutral position (idling) High-beam headlamp — with EU markets ex- port Emission warning light 10 Cruise control (…

• Page 25: Multifunction Display

  Multifunction display Speedometer Coolant temperature Odometer ( Clock ( Heated handlebar grips Gear indicator display, «N» indicates «neutral». Riding mode RAIN SPORT RACE Setting riding mode with Pro riding modes Additional riding modes SLICK USER NOTICE Refer to Chapter 5 for informa- tion regarding the display modes available for track use.

• Page 26: Abs Pro Display

  ABS Pro display with ABS Pro Warnings for which no individual warning light is present are sig- naled by the universal warning During the Pre-Ride-Check, the light 1 which lights up in combi- availability of the ABS Pro func- nation with the appearance of a tion is indicated in the multifunc- warning notice such as 2 in the ABS Pro…

• Page 27
  Overview of warning indicators Indicator and warning Warning symbols in the Meaning lights display panel EWS! lights up red is displayed Electronic immobilizer is active ( flashes red Coolant tempera- Coolant temperature too high ( ture display flashes Engine! lights up yellow Engine in emergency-operation mode is dis- played…
• Page 28
  Indicator and warning Warning symbols in the Meaning lights display panel Front lights defective ( VDS! lights up yellow is shown in Motorcycle has fallen over ( the empty display VDS! lights up yellow is displayed Fall sensor defective ( flashes ABS self-diagnosis not completed lights up…
• Page 29
  Indicator and warning Warning symbols in the Meaning lights display panel lights up DTC switched off ( lights up DTC error ( DDC! lights up yellow is displayed DDC error ( The gear indicator Gear not trained ( flashes. DWALO! lights up yellow is dis- DWA battery charge level low (…
• Page 30
  Indicator and warning Warning symbols in the Meaning lights display panel NO CAN lights up red is dis- CAN open/short circuit ( played NO CODING lights up yellow Encoding missing ( displayed SERVICE! lights up yellow Service date missed ( indicated lights up Fuel down to reserve (…
• Page 31
  In exceptional cases, the frequently be too high, have placed, preferably by an autho- the fault rectified as quickly engine stops and can no longer rized BMW Motorrad retailer. as possible by an authorized be started. Coolant temperature too workshop, preferably an autho-…
• Page 32
  , suppress source eliminated by a special- the fault message with the WARNING ized service facility, preferably WARN LAMP OFF parameter an authorized BMW Motorrad Overlooking the vehicle in Retailer. traffic due to a defective light source on the vehicle…
• Page 33
  ( 174). cialist service facility, preferably motorcycle. Replacing light source of right- an authorized BMW Motorrad hand parking light ( 175). Possible cause: Retailer. Front light source defective. Taillight and lights for…
• Page 34
  Contact an authorized service as soon as possible at an facility, preferably an authorized authorized service facility, Possible cause: BMW Motorrad retailer. preferably an authorized The ABS system has been deac- BMW Motorrad retailer. tivated by the rider. Activating ABS (…
• Page 35
  DTC switched off DTC indicator and warning BMW Motorrad retailer. light flashes slowly. DTC indicator and warning light lights up. DDC error with Dynamic Damping Control Possible cause:…
• Page 36
  The gear indicator flashes. tected an error. shop, preferably an authorized The gearshift assistant Pro Have the malfunction corrected BMW Motorrad retailer. has no function. as soon as possible at an Possible cause: DWA battery charge level authorized service facility,…
• Page 37
  Contact an authorized service The number of possible racing facility, preferably an authorized facility, preferably an authorized starts with Launch Control has BMW Motorrad retailer. BMW Motorrad retailer. been exceeded. Let the clutch cool down. DWA battery drained Speed warning…
• Page 38
  Consult a certified workshop, preferably an authorized BMW Motorrad retailer, for If service is due within 1000 km setting of the date. (700 miles), the remaining distance 1 is displayed and…
• Page 39
  Do not drive to the extent that dicates the distance that can still an approximate reading. the fuel tank is completely be driven with the remaining fuel. BMW Motorrad therefore empty. This distance is calculated based recommends that you do not Possible cause:…

• Page 41: Operation

  Operation Steering and ignition lock … 40 Heated handlebar grips … . . 58 Electronic immobilizer….41 Rider’s seat and hump cover .

• Page 42: Steering And Ignition Lock

  Steering and ignition Switching on ignition lock Keys You are provided with 2 ignition keys. Should you lose your keys please refer to the information regard- ing the electronic immobilizer (EWS) ( 41). Turn the ignition key to posi- A single key fits the steering and tion 1 while moving the handle- Turn ignition key to position 1.

• Page 43: Electronic Immobilizer

  Switch off ignition recognized as «authorized» for Replacement and spare keys are your motorcycle. only available through an autho- rized BMW Motorrad retailer. NOTICE The keys are part of an inte- grated security system, so the A further key attached to the…

• Page 44: Lights

  Lights WARNING Parking lights Operation of the emergency The parking lights come on au- ON/OFF switch when riding tomatically when the ignition is Danger of falling due to blocking switched on. of rear wheel Do not operate the emergency NOTICE ON/OFF switch when riding.

• Page 45: Hazard Warning Lights System

  Hazard warning lights Ignition can be switched off. Switch on ignition and press system button 1 again to switch off Switching on hazard hazard warning flashers. warning flashers Turn indicators Switch on ignition. Operating turn indicators NOTICE Switch on the ignition. The hazard warning flashers Immediately after switching off place a strain on the battery.

• Page 46
  Press button 1 into center po- sition to switch off turn indica- tors. NOTICE The turn signals automatically switch off when the defined riding time and distance have been reached. The defined riding time and distance can be set by an authorized BMW Motorrad retailer.

• Page 47: Multifunction Display

  Multifunction display Overview — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Odometer Standard display Select displays in multi- function display ( 46). LAP TIMER ( LIMIT ( Factory setting for WARN SPEED ( 116) RACE INFO ( 101) SETUP MENU (…

• Page 48
  RANGE Selecting displays in Cruising range Repeatedly press SET 2 until TRIP 1 desired display is selected. Trip odometer 1 multifunction display TRIP 2 The following displays are avail- Trip odometer 2 Switch on ignition. able: Average consumption All information required for LAPTIMER: the lap times and volume per distance or vice operation on public roads is…
• Page 49
  RACE INFO ENTER Trip mileage = SETUP MENU ENTER Resetting average data shown, press and hold SET 2 to open the respective menu. Switch on ignition. Resetting trip odometer Switch on the ignition. Briefly press TRIP 1 repeatedly until average value to be reset is displayed.

• Page 50: Clock

  Clock Anti-theft alarm (DWA) Briefly press SET 2 repeatedly SETUP EQIP:CLOCK until Setting clock with anti-theft alarm system TIME is displayed. (DWA) Switch on ignition. Press and hold SET 2. Minutes 4 flash. Activation Briefly press TRIP 1 to in- Switching on ignition ( 40).

• Page 51
  The Set emergency on/off switch type of alarm sound can be set NOTICE (kill switch) to normal operating by an authorized BMW Motorrad position. If the display has been scrolled retailer. Switch on the ignition. too far, briefly press SET repeat- Turn indicators light up once.

• Page 52: Antilock Brake System

  If the display has been scrolled DWA AUTO ON : DWA is acti- BMW Motorrad Race ABS. too far, briefly press TRIP to vated respectively is activated scroll back. automatically when the ignition NOTICE Press and hold SET 2 to open is switched off.

• Page 53: Dynamic Traction Control

  Dynamic Traction Activating ABS Control (DTC) Deactivating DTC Switch on the ignition. NOTICE The DTC function can also be deactivated while driving. Press and hold button 1 un- til first the DTC indicator and Press and hold button 1 un- warning light 3 and then the til first the DTC indicator and ABS indicator and warning…

• Page 54: Riding Mode

  Riding mode vided. Use of the riding modes with Dynamic Damping Control BMW Motorrad has developed 5 (DDC) riding scenarios for your motor- cycle from which you can select The chassis and suspension ad- the one matching your situation: justment is also adapted to the Riding on wet roads.

• Page 55
  Press button 1. The selection arrow 2 and the with Pro riding modes selectable riding modes 3 are SLICK The riding modes 4 and NOTICE displayed. The last active riding USER 5 are also offered. mode flashes. Details on the selectable driving Press button 1.
• Page 56
  Selection arrow 2 and the inac- and DDC) as desired in accor- tive riding modes are hidden. dance with his/her preferences or the current marginal condi- The new riding mode is acti- tions. This requires a technical vated during operation under understanding of the settings the following conditions: (see the chapter «Technology…

• Page 57: Cruise Control

  Storing speed Accelerating After every Pre-Ride-Check for USER active riding mode. USER After changing to the riding mode. When pressing the button 1 USER (MODE) in the riding mode without changing the riding mode. Cruise control with cruise control Briefly press button 1 forward. Briefly press button 1 forward.

• Page 58
  Decreasing speed Deactivating cruise Resuming former cruising control speed Actuate brakes, clutch or throt- tle grip (take back throttle be- yond back position) to deacti- vate cruise-control system. NOTICE When changing gear using the Pro Gear-shift Assistance func- Briefly press button 1 back- tion, the cruise-control system ward.

• Page 59: Speed Warning

  Indicator light for cruise- Speed warning ( 116) control system lights up. Switching off cruise control To set current speed as new limit: press and hold SET 2. Briefly press SET 2 repeat- The current speed is displayed. LIMIT edly until is shown in To increase set speed: briefly display.

• Page 60: Heated Handlebar Grips

  NOTICE The increase in power consumption caused by the heated grips can drain the battery if you are riding at low engine speeds. If the battery is inadequately charged, the heated grips are switched off to ensure starting capability. When the preset speed is ex- To deactivate the speed warn- ceeded, the shiftpoint light 1 re- ing: Press and hold TRIP 1 un-…

• Page 61: Rider’s Seat And Hump Cover

  Rider’s seat and hump Installing rider’s seat cover Remove rider’s seat The handlebar grips can be heated at two different levels. Insert rider’s seat into the fix- The second stage 2 is intended ture 2, then position it over the for rapid heating of the handlebar screw sockets 3.

• Page 62
  Installing hump cover Press cover of rider’s seat over Unlock the lock 2 in the hump screw sockets toward front cover 1 using the ignition key. Insert hump cover into the re- somewhat and hold in place. Lift hump cover at the rear and tainers 1 on the left and right.

• Page 63: Helmet Holder

  Lock the lock with the ignition face with upholstered side fac- key. ing downward. Remove passenger seat Install passenger seat with passenger package with passenger package Park motorcycle, ensuring that support surface is firm and level. Fold passenger seat down while pressing forwards slightly.

• Page 64: Luggage Straps

  with passenger package Install passenger seat ( 61). Set down helmet on rider’s Remove passenger seat seat. 61). Turn over passenger seat. Luggage straps with passenger package Secure luggage on motorcycle Remove passenger seat ATTENTION 61). Turn over passenger seat. Incorrect positioning of the helmet lock Fairing scratched…

• Page 65
  Install passenger seat ( 61). Use luggage loops 1, e.g. in conjunction with passenger footrests, to lash luggage onto passenger seat. When doing so, make sure that the rear trim is not damaged.

• Page 67: Setting

  Setting Mirrors ……66 Headlight ……66 Brakes .

• Page 68: Mirrors

  If there are doubts as to the cor- tion by twisting. rect headlight range, have the adjustment checked by a spe- Headlight cialized workshop, preferably by an authorized BMW Motorrad Adjusting headlight for retailer. RHD/LHD traffic This motorcycle’s headlight fea- Brakes tures a symmetrical low beam.

• Page 69: Steering

  Steering Basic steering damper NOTICE Adjust steering damper adjustment setting The adjusting screw is easier to Opens at 8 clicks (starting at turn if you push the brake lever fully closed) (Highway opera- forwards. tion) Adjustment options: Opens at 5 clicks (starting at from position 1: largest dis- fully closed) (Racetrack) tance between handlebar grip…

• Page 70
  Adjust spring preload on Load motorcycle with rider. front wheel With the assistance of a helper, measure distance D between without Dynamic Damping points 1 and 2 again and cal- Control (DDC) culate difference (spring deflec- tion) between the measured Park motorcycle, ensuring that values.
• Page 71
  Make sure that the same val- Measure the distance D be- ues are set on the left and tween the lower edge 1 of the right. slider tube and the front axle 2. Load motorcycle with rider. Adjust spring preload on With the help of a second front wheel person, measure the…
• Page 72
  Adjusting spring preload Adjustment of spring at rear wheel preload dependent on without Dynamic Damping loading Control (DDC) Spring deflection of rear wheel Park motorcycle, ensuring that 0.31…0.47 in (8…12 mm) (With support surface is firm and rider 187 lbs (85 kg)) level.
• Page 73
  license-plate carrier and the To increase the spring deflec- Switch on the ignition. tion (reduce spring preload), bolt 2 of the chain guard. Start engine to ensure that the use the tool from the onboard battery does not discharge. Load motorcycle with rider. tool kit to turn the adjustment With the assistance of a sec- NOTICE…

• Page 74: Damping

  Damping Setting Damping must be adjusted to the road conditions and the spring preload. A rough road surface requires softer damping than a smooth road surface. An increase in spring preload To decrease the spring deflec- Adjust compression damping requires firmer damping, a re- tion (increase spring preload), with adjusting screw 1 and red duction in spring preload re-…

• Page 75
  ing 2 points to higher figure on ing 2 points to higher figure on scale. scale. To decrease damping: turn To decrease damping: turn adjusting screw with tool from adjusting screw with tool from onboard tool kit so that mark- onboard tool kit so that mark- ing 2 points to lower figure on ing 2 points to lower figure on…
• Page 76
  Factory settings for Compression stage, ba- jounce/rebound at front sic setting, rear Position 4 Position 4 (standard setting with rider 187 lbs (85 kg)) Adjusting compression Position 9 (sport-oriented set- damping on rear wheel ting with rider 187 lbs (85 kg)) without Dynamic Damping Adjusting rebound-stage Control (DDC)

• Page 77: Ddc

  ing 2 points to higher figure on Factory settings for scale. jounce/rebound at rear To decrease damping: turn adjusting screw with tool from Position 4 onboard tool kit so that mark- ing 2 points to lower figure on scale. Setting Rebound stage, basic Damping must be adjusted to the setting, rear…

• Page 78
  Park motorcycle, ensuring that Adjust damping as desired with NOTICE support surface is firm and TRIP 1 and SET 2. level. +1 … +7 : Damping increase The damping for all riding modes Select submenu ( 111). in a maximum of seven steps is set and stored separately in SETUP DDC-SYS (harder).
• Page 79
  +1 … +7 FRONT DMP Adjusting : Damping increase in a maximum of seven steps (harder). -1 … -7 : Damping decrease in a maximum of seven steps (softer). : Factory setting Press and hold SET 2 until dis- played value no longer flashes. The value for the current riding To set the zero position, briefly mode is saved.
• Page 80
  CALIB DONE is displayed in line 3 and 4. If CALIB FAIL is displayed: Repeat adjustment. CALIB DONE is not dis- played after repeated adjust- ment, consult a specialized workshop, preferably an autho- rized BMW Motorrad retailer.

• Page 81: Riding

  Riding Safety information ….80 Checklist ……81 Starting .

• Page 82: Safety Information

  Your authorized cycle: Burn hazard BMW Motorrad retailer will be Settings of spring-strut and happy to advise you and has shock absorber system the correct clothing for every CAUTION Imbalanced load purpose.

• Page 83: Checklist

  Catalytic converter Danger of overheating Checklist There is a danger of overheating Observe checklist ATTENTION and damage if misfiring causes Use the following checklist to unburned fuel to enter the cat- Engine idling for a lengthy check your motorcycle at regu- alytic converter.

• Page 84: Starting

  Starting Adjusting compression damp- ing on rear wheel ( 74). Starting engine with Dynamic Damping Control Switch on the ignition. (DDC) Pre-Ride-Check is carried out. Adjusting spring preload at rear wheel ( 71). ABS self-diagnosis is performed. ( with Dynamic Damping Control DTC self-diagnosis is per- (DDC) formed.

• Page 85
  ABS self-diagnosis The warning and telltale lights go Phase 1 The readiness for operation of out. the BMW Motorrad Race ABS with ABS Pro is checked by the self-diagnosis. ABS Pro is displayed when The self-diagnosis routine runs…
• Page 86
  Check wheel sensors while The self-diagnosis routine starting off. is determining whether DTC self-diagnosis not ABS indicator light flashes. BMW Motorrad DTC is ready for completed operation. The self-diagnosis routine runs automatically when The DTC function is not ABS self-diagnosis you switch on the ignition.

• Page 87: Running In

  WARNING not switched off until the first tions of road if possible. inspection by your authorized New brake pads Observe the engine run-in BMW Motorrad retailer. Extension of the braking distance, speeds. accident hazard Mileage until running-in Engine run-in speed Brake early.

• Page 88: Shifting Gears

  Pro shift assistant Shifting speed WARNING During driving, the shiftpoint light with Pro shift assistant indicates the speed at which the Loss of adhesion of new tires rider should shift into the next- on wet roads and at extreme NOTICE highest gear.

• Page 89: Brakes

  Locking up of the front wheel gear change. change gear and initiates gear- is prevented by BMW Motorrad shift assistance. Brakes Race ABS. When driving at constant With the frequently instructed…

• Page 90
  Wet, soiled brakes road surface. Due to the miss- Brake early until the full braking ing wheel load, the ABS must action is available again. Moisture and dirt on the brake already prevent a tendency of the rotors and the brake pads result ABS Pro front wheel to lock up with min- in a decrease in the braking ac-…

• Page 91: Parking Your Motorcycle

  Parking your ards in curves, locking-up and The availability of ABS Pro in the USER riding mode de- slipping of the wheels is pre- motorcycle pends on the selected mode. vented within the scope of the Side stand physical riding limits. Falling cannot be excluded Switch off engine.

• Page 92: Refueling

  Refueling Do not sit on the motorcycle Damage to the engine and fuel when it is parked on the side supply stands. WARNING Do not refuel with E85, i.e. fuel with an ethanol content If the slope of the road permits, Fuel is highly flammable of 85 %, or with Flex Fuel.

• Page 93
  Make sure ground is level and NOTICE firm and place motorcycle on side stand. The «usable fuel quantity» spec- ified in the technical data is the NOTICE fuel quantity, which can be re- fueled if the fuel tank was com- The available fuel tank volume pletely emptied, i.e., if the engine can only be optimally used with…

• Page 94: Securing Motorcycle For Trans

  Securing motorcycle with the assistance of a second Tension straps downward. person. for transport Push motorcycle onto transport Protect all component surfaces surface, and do not place on against which straps are routed side stand. against scratching. For exam- ple, use adhesive tape or soft cloths.

• Page 95: On The Racetrack

  On the racetrack Display for racing mode … . . 94 Shift pattern reversal ….134 LAPTIMER .

• Page 96: Display For Racing Mode

  Display for racing mode Multifunction display Current angle of inclination when cornering Direction for angle of incli- nation = left | = vertical / = right Maximum angle of inclina- tion for left and right Factory setting for BANK DISP ( 117) ABS control intervention…

• Page 97
  DTC torque reduction Factory setting for DTC DISP ( 117) DTC setting Adapt DTC ( 125).

• Page 98: Laptimer

  LAPTIMER LAP TIMER The fastest of the stored laps, marked with «BESTLAP». The display in these lines Multifunction display can be switched over. The all-time best lap time, without a marking. Individualize LAPTIMER 98). The running time of the current lap.

• Page 99
  Overview of LAP TIMER — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Odometer Standard display Select displays in multi- function display ( 46). Individualize LAPTIMER 98). Start time recording 98). Interrupt/continue time en- try (…
• Page 100
  Individualizing LAPTIMER LAPTIMER display structure When driving over Start/Finish 119) line, press button 1 again to start recording for next race Starting time recording lap. The data of the preceding race Requirement lap will be saved. The LAPTIMER is opened. 2 restarts at 00:00:00 If the display mode is exited…
• Page 101
  Interrupting time entry The infrared receiver available as an optional accessory must Requirement be connected to the connector Time recording is running. for optional accessories under the right-hand fairing side panel 136). In the SETUP RACETRACK, the LAPTIMER trigger mode must be set to LAPTM TRIG AUTO or LAPTM TRIG EX- Press and hold TRIP 1 to stop…
• Page 102
  mode does counting begin at lap than on your previous best lap, 1 again. the processor anticipates that this lap will be your new best is displayed. time. The «Fastest lap» indica- tor 1 lights up. Fastest lap anticipated This function has to be activated SETUP RACETRACK in the 122).

• Page 103: Race Info

  RACE INFO RACE INFO Part 1 — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Delete all-time best lap. Information on the current best lap. Three displays in alterna- tion. Information on each race lap ( 104) Deleting currently best lap.

• Page 104
  RACE INFO Part 2 — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Information on lap 01. Select saved lap ( 103). Information on each race lap ( 104) Delete lap ( 106). Information on lap 02. Total of all lap times and lap distances.
• Page 105
  Selecting saved lap der; each time TRIP 1 is pressed, they are displayed in the reverse Requirement order: RACE INFO is displayed. BEST- All-time best lap time EVER BEST Best stored lap time LAST Last stored lap time LAP 01 All other stored laps ……
• Page 106
  Information on each race In alternation for the in- dicted lap: Maximum speed (max) Average speed (Ø) Minimum speed (min) Maximum angle of inclina- tion for left and right of the displayed race lap Race lap to which dis- played data refer Lap time of displayed race In alternation for the in- dicted lap:…
• Page 107
  Distance covered of the displayed race lap ABS control intervention: «ABS» displayed = race lap with ABS control interven- tion «ABS» hidden = race lap without ABS control inter- vention Maximum deceleration in the displayed race lap Maximum DTC torque re- duction in the displayed race lap 10 DTC in the displayed race…
• Page 108
  BEST-EVER Clearing recording recording that has already been is deleted: —:—:— deleted. Requirement All recordings have now been RACE INFO is displayed. Deleting lap deleted. RACE INFO EXIT is dis- Requirement played. RACE INFO is displayed. All-time best lap BEST- The all-time best lap ( EVER ) is the fastest of all…
• Page 109
  BEST-EVER Exiting RACE INFO Activating standard : The best lap saved is adopted as the new display all-time best lap time. BEST : The lap that previously had been the second best lap is adopted as the new best lap. LAST : The lap that previously had been the second-to-the-…
• Page 110
  LIMIT : TRIP pressing and holding switches the speed limit LIMIT OFF warning off ( is displayed.

• Page 111: Setup Menu

  SETUP MENU Overview SETUP MENU — Solid line: briefly press button. ‑ ‑ Dotted line: press and hold button. Select submenu ( 111). Display submenu with Dynamic Damping Control (DDC) SETUP DDC-SYS 111) Set parameter ( 113). Display submenu SETUP EQUIPMENT 111) Display submenu SETUP RACETRACK…

• Page 112
  Display submenu Only with USER riding mode active with Pro riding modes SETUP USER-MODE 113) Reset all parameters FAC- TORY RESET Exit SETUP MENU Exit settings ( 114).
• Page 113
  Selecting submenu Briefly press TRIP 1 or SET 2 With spring travel sensor for repeatedly until desired sub- front forks: Front rebound- FRONT REB menu is displayed. stage damping Press and hold SET 2 to open With spring travel sensor for desired submenu.
• Page 114
  BRAKE DISP ON or leave deactivated SETUP RACETRACK or off DWA AUTO OFF BRAKE DISP OFF SETUP RACETRACK Set time display Submenu for switching over Switch-on speed for shiftpoint CLOCK TIME the units for the odometer GSL ON-RPM light (Gear Set brightness display, remaining range Shift Light)
• Page 115
  be started) of the headlight or switch off the pit lane limiter Dynamic Damping Control PIT LIMIT OFF flasher button for LAPTIMER for racing with series tires LAPTM DEB-TM DDC RACE in sec- SETUP USER-MODE LAPTM DEB-TM onds or Dynamic Damping Control for CUSTOM in minutes and sec- DDC SLICK…
• Page 116
  Exiting settings Repeatedly press TRIP 1 or SETUP MENU SET 2 until EXIT is displayed. Press and hold SET 2 to exit SETUP MENU SETUP MENU ENTER indicated. Press and hold SET 2 until dis- played parameter begins to Press and hold TRIP 1 flash.

• Page 117: Setup Ddc-Sys

  Reading display range Factory setting: 0 -7 (soft) … +7 (stiff) Factory setting: 0 NOTICE BMW Motorrad does not offer the spring travel sensor required for the separate adjustment of the rebound and pressure stage. It is available as a racing…

• Page 118: Setup Equipment

  You can request SETUP EQUIPMENT Speed warning further information by sending an Display brightness email to «hp-race-support@bmw- motorrad.com». Leveling sensor calibration LIMIT The speed is set in the display. If the riding speed Five different intensities are avail- SPEED!

• Page 119
  Light error Lean angle Dynamic Traction Control If the turn indicators are removed Adjustment of the display for an- Setting the displays for DTC: or the license plate carrier is de- gle of inclination: angle of incli- Current and maximum DTC tached for track use, the vehicle’s nation, direction for angle of incli- torque reduction and DTC…

• Page 120: Setup Racetrack

  Deceleration SETUP RACETRACK Switch-off speed of shifting flasher Switch-on speed of shifting flasher Adjustment of the displays for deceleration: Current and max- Adjustment of the switch-off imum deceleration in m⁄s², and speed for the shiftpoint light. Adjustment of the switch-on ABS intervention.

• Page 121
  Brightness of shifting Flashing frequency of When 8 is selected, the shift- point light and the speed warn- flasher shiftpoint light ing flash rapidly. LAPTIMER display structure The LAPTIMER display struc- ture can be selected from six ver- sions. Adjustment of shifting flasher Adjustment of the flashing fre- brightness as a percentage of quency of the shiftpoint light and…
• Page 122
  Version 2 Version 3 Version 4 The required time of the previous The required time of the previous Running time of the current lap lap is shown in the third line and lap is shown in the third line and is shown in the third line and the the running time of the current the best lap time of the stored…
• Page 123
  Display duration for last stopped time Version 5 Version 6 The running time of the cur- The third line remains empty and rent lap is shown in the third line the running time of the current Adjustment of the display dura- and the all-time best lap time lap is shown in the fourth line.
• Page 124
  Minimum lap time Reading display range Fastest lap 0, 10, 30, 45, 60, CUSTOM Factory setting: 10 When determining the lap times, The «fastest lap expected» func- the time can be set which must tion ( 100) is activated or de- elapse after the first received sig- activated.

• Page 125: Setup User-Mode

  Speed limiter for pit lane SETUP USER-MODE with Pro riding modes The various possibilities for start- ing time recording are set. Reading display range Adjustment of the maximum Adjustment of antilock brake sys- AUTO, EXTERN, MANUAL speed (±100) of the engine when USER-MODE tem ABS in Factory setting: AUTO…

• Page 126
  ENGINE with Dynamic Damping Control (DDC) ENGINE Adjustment of the Dynamic Trac- Adjustment of the USER- tion Control in the throttle response in the USER- MODE MODE. Setting the Dynamic Damping Reading display range USER-MODE Reading display range Control Reading display range RAIN, SPORT, RACE, SLICK RAIN, RACE, SLICK Factory setting: SLICK…

• Page 127: Dtc

  Briefly press 2 (-) to decrease turns sufficiently. In this case, NOTICE the value 3. BMW Motorrad recommends The set value 3 is shown in the The DTC can also be adjusted switching off the DTC temporar- multifunction display and lies while riding.

• Page 128: Start Of Race

  Race start with Launch Note that the rear wheel will spin off. If the front wheel is detected in the loose substrate, and close as lifting off, the torque is tem- Control the throttle in a timely manner porarily slightly reduced. From a before reaching a solid substrate.

• Page 129
  Start possible with Launch Con- Cooling phase of the trol. clutch Perform start as described be- low. Approx. 20 min (with the en- gine stopped) Perform start as usual, open throttle grip at least to such an extent that speed limiting is reached.

• Page 130: Speed Limiter For Pit Lane

  Speed limiter for pit Hold down starter button 1. Speed for deactivation of Twist throttle grip open until lane the engine speed limita- PIT LIMIT … is reached. tion for Launch Control with Pro riding modes The engine speed is limited Approx.

• Page 131: Tion

  Install nuts on the rear side of Use the HP Race Cover Kit from right and remove the mirrors. the trim panel with the appro- BMW Motorrad to cover the ex- priate torque. posed screw sockets and secure the mounting attachment.

• Page 132: Removing And Installing License

  message will appear in the with passenger package Mirror on front panel car- display. This warning message Remove passenger seat rier is suppressed by activating the 61). EQIP WARN LAMP function in Removing hump cover ( 60). Thread-locking compound: SETUP MENU mechanical Work the plug connection 1 6 lb/ft (8 Nm)

• Page 133
  Remove bracket 3 for anti-theft with passenger package NOTICE alarm system. Remove passenger seat 61). Before the connector for the anti- Removing hump cover ( 60). theft alarm system is discon- nected, it must be ensured that the DWA has been deactivated in SETUP MENU Remove the screw 4.
• Page 134
  with anti-theft alarm system (DWA) Insert anti-theft alarm sys- Work the plug connection 1 tem 2; attach in bracket 3. with the cable through the lower rear section 2. Fit the screw 4. Install bracket 3 for the anti- Connect plug connection 1, Connect plug connection 1 for theft alarm system.

• Page 135: Removing And Installing Front Turn

  with passenger package Install passenger seat ( 61). Installing hump cover ( 60). Removing and installing front turn indicator Remove front turn signal NOTICE Remove screw 1 and take off Fasten fairing side panel in The operation described here turn signal 2. grommet 3 and detent pin 4.

• Page 136: Shift Pattern Reversal

  Installing front turn signal Guide cable through the fairing Installing fairing side panel side panel. 180). Shift pattern reversal Shift pattern for racing mode For the racing mode, the shift pattern can be reversed by mod- ifying the gear-shift rod. Shift pattern reversal means that the Remove screw 1 on inside of gearshift lever must be actuated…

• Page 137
  with Pro shift assistant Clean thread 1. Insert bolt through ball joint and washer and install in thread Slide protective cap 2 onto Clean thread 1. for shift pattern reversal. gearshift rod 4. Slide protective cap 2 onto Remove screw 3. gearshift rod 4.

• Page 138: Connector For Optional Acces

  Connector for optional Under right-hand fairing side panel accessories Equipment The vehicle is equipped with the following connectors for special and racing accessories: Infrared receiver Spring travel sensor Optional accessory Insert bolt through ball joint HP Race Data Logger and washer and install in thread for shift pattern reversal.

• Page 139
  Under left-hand fairing side panel Connector for DWA and Connector for DWA and HP Race data logger HP Race data logger Terminating resistor Optional accessories (con- nector with power supply + Under the hump cover Mounting special and LIN; e.g. as for navigation racing accessories without anti-theft alarm system system)

• Page 140: Sories

  Removing hump cover ( 60). Remount cover cap or termi- nating resistor after removing Unlock protective cap or ter- connector. minating resistor and pull off connector. Remount cover cap or termi- Mount special or racing acces- nating resistor after removing sories.

• Page 141: Technology In De

  Technology in detail Antilock Brake System (ABS) ..140 Dynamic Damping Control (DDC) ……143 Dynamic Traction Control (DTC) .

• Page 142: Antilock Brake System

  ABS intervenes and tact to the road. At this point in adjusts the brake pressure to the Attempt at a burn-out de- time, the BMW Motorrad Integral maximum transferable braking spite integral function ABS must assume extremely low force.

• Page 143
  Under these circumstances the nosis routine must be completed rear wheel can lift off the ground, before the error will be displayed. BMW Motorrad Race ABS and the outcome can be a high- Apart from problems on the noticeable to the rider?
• Page 144
  Dynamic Traction Race ABS system of the condition, it is vital that the Control DTC and for Dynamic S 1000 RR provided for a very specified service intervals are Damping Control DDC. high level of safety while braking kept to.

• Page 145: Dynamic Damping Control

  well, however the spring travel calibration is started in the Advantages for the rider SETUP DDC-SYS is not measured. menu. The advantages of ABS Pro for The damping values for the front the rider are sensitive response Dynamic Traction wheel and for the rear wheel and high braking and riding sta- SETUP can be adjusted in the…

• Page 146
  This case cannot gle of inclination and other fac- be controlled by BMW Motorrad tors into account. DTC.

• Page 147: Riding Mode

  RAIN The DTC system intervenes series tires recommended by SPORT (standard mode) early enough to always prevent BMW Motorrad. The riding the rear wheel from spinning if RACE SLICK USER modes possible.

• Page 148
  Maximum support for integral The rear wheel lift-off detection pressure buildup when only the function is activated. The DTC system intervenes brake lever is actuated. later than in the RAIN riding ABS Pro ABS for rear wheel is activated. mode so that minor drifts are ABS Pro provides full support The rear wheel lift-off detection possible at the ends of curves.
• Page 149
  Throttle response brief wheelies at the end of ABS Pro curves are also possible. ABS Pro is designed analo- The maximum torque is pro- The front wheel lift-off detec- gously to Race ABS to have a vided. tion is switched on, however it sporty riding style with inter- The engine’s response is opti- offers only minimal support.
• Page 150
  DTC changeover is switched ABS Pro DTC changeover is switched on. The DTC changeover is ABS Pro is switched off. stored separately for each DTC Launch Control (L-CON) is mode. switched on. Setting for damping: Track = Launch Control (L-CON) is switched on.

• Page 151: Pro Shift Assistant

  engine speed limitation is ef- To stop transmission of drive Your motorcycle is equipped with fective. torque, a Gear Shift Assistant originally developed for racing but now Motorcycle must be stopped ABS off specially adapted for use in pub- with the ignition switched on Support by the ABS function is lic road traffic.

• Page 152
  Shifting times are faster than Changing the accelerator twist- Idle speed when the clutch is used to grip position during the gear- change gears. shift sequence may cause the function to abort and/or the gear 1270 min (Engine at operat- For the system to detect the rid- change to fail.

• Page 153: Maintenance

  Maintenance General instructions ….152 Fuses ……183 Tool kit .

• Page 154: General Instructions

  Adjusting spring preload you can obtain from your autho- sert at rear wheel ( 71). rized BMW Motorrad retailer. Phillips PH1 and Torx T25 Reversible screwdriver with Remove and install trim Special tools and thorough spe- Phillips and straight blade panel components.

• Page 155: Front Wheel Stand

  Dynamic Damp- ing Control (DDC) ATTENTION Adjusting compression damping on rear wheel Use of the BMW Motorrad 74). front wheel stand without an Spare fuses with puller tool Use basic stand (83 30 0 402 additional center or auxiliary Miniature fuses 4 A, 7.5 A…

• Page 156: Rear-Wheel Stand

  Rear-wheel stand adapter inserted into the front suspension. Mount rear-wheel stands Adjust the height of the aux- iliary stand so that the front wheel is lifted slightly off the ground. Insert the service adapter (83 30 2 152 840) 1 at the left and right into the front suspension.

• Page 157: Engine Oil

  Install the service adapter (83 Turn in the bracket 2 with the Attach the rear wheel stand to 30 2 152 841) 1 on the left long sides facing the outside. the rear wheel swing arm and and right into the rear wheel press it on the ground evenly.

• Page 158
  Allow engine to run in neutral because they would attack for one minute. the coatings on engine Switch off ignition. components, BMW Motorrad Specified level of engine recommends BMW Motorrad ADVANTEC Ultimate Oil. Approx. 3.7 quarts (Approx. Between the MIN and MAX 3.5 l) (with filter replacement)

• Page 159: Brake System

  Add engine oil up to specified Have the brakes checked at an level. authorized workshop, preferably Park motorcycle, ensuring that an authorized BMW Motorrad Check engine oil level ( 155). support surface is firm and retailer. Install cap of oil fill location 1.

• Page 160
  Use of unsuitable brake pads BMW Motorrad retailer. Failure of the brake system due to loss of the brake pads If genuine BMW Motorrad Use only brake pads with a suf- brake pads are not installed, ficient thickness of the brake be sure to check thickness of pad carrier plate.
• Page 161
  Have brake pads replaced at an authorized service facil- ity, preferably an authorized BMW Motorrad retailer. Checking front brake fluid level Conduct a visual inspection of Rear brake-pad wear the brake pad thickness. Direc-…
• Page 162
  Check brake fluid level regularly. Have defect corrected as soon as possible by an authorized workshop, preferably an autho- rized BMW Motorrad retailer. Check brake fluid level in brake Front brake fluid level Checking rear brake fluid fluid reservoir 1.

• Page 163: Clutch

  Check brake fluid level regularly. Have defect corrected as soon as possible by an authorized workshop, preferably an autho- rized BMW Motorrad retailer. Read brake fluid level at rear Rear brake fluid level Clutch brake-fluid reservoir 1. Checking clutch function…

• Page 164: Coolant

  Check clutch lever play Adjust clutch lever play Coolant Checking coolant level Park motorcycle, ensuring that support surface is firm and level. Operate clutch lever 1 until To increase clutch play: turn the screw 2 into handlebar fit- resistance is felt. ting.

• Page 165: Tires

  Poorer handling characteristic of motorcycle, reduction of tire service life Ensure proper tire inflation pressure. WARNING Valve inserts open of their own accord at high speeds Open cap 1 of expansion tank. Sudden loss of tire inflation pres- Coolant, specified level Add coolant up to specified sure level.

• Page 166: Rims And Tires

  Tire recommendation minimum tread depth is Checking wheel rims For every size of tire, reached. BMW Motorrad has tested and Park motorcycle, ensuring that approved certain makes as Park motorcycle, ensuring that support surface is firm and roadworthy. BMW Motorrad support surface is firm and level.

• Page 167
  Remove screws 2 of brake please contact a specialist calipers. calipers on left and right. service facility, preferably a BMW Motorrad retailer. In some cases the data stored in the control units must be adapted to the new wheel sizes.
• Page 168
  Please see the information on Place motorcycle on an auxil- the sensor ring and wheel the effect of wheel sizes on the iary stand; BMW Motorrad rec- speed sensor caused by ABS and DTC chassis control ommends the BMW Motorrad…
• Page 169
  Always have the tightening torques checked by a spe- Lift front wheel and install cialized workshop, preferably Clamping screw in axle quick-release axle 1 to an authorized BMW Motorrad adapter retailer. appropriate torque. Tightening sequence: Tighten Quick-release axle in ATTENTION…
• Page 170
  Removing rear wheel position cable routing 2. bore and secure with screw 1. Install screws 3 with appropri- Raise motorcycle, preferably ate torque. with a BMW Motorrad rear- wheel stand. Radial brake calipers on Mount rear-wheel stands the axle adapter 154).
• Page 171
  Loosen lock nuts 2 on left and right. Loosen adjusting screws 3 on left and right. Remove adjusting plate 4 and slide axle as far as possible to- ward inside. Press brake caliper 1 against Roll rear wheel as far forward brake disk 2.
• Page 172
  200 ⁄ 55 ZR 17 or vice versa, the parameters of the control systems must be encoded by a BMW authorized workshop, preferably by a BMW Motorrad Roll rear wheel toward rear retailer. out of swing arm while pulling brake caliper carrier 1 toward…
• Page 173
  Mount brake caliper carrier 1 in Roll rear wheel further into Roll rear wheel as far forward guide 2. swing arm while simultaneously as possible and lay chain 1 on pushing brake caliper carrier 1 chain sprocket. toward the front. Make sure that wheel speed sensor 1 is not damaged when Insert right-hand adjusting…

• Page 174: Light Sources

  through the shim in the brake- Park motorcycle, ensuring that caliper support and the rear support surface is firm and wheel. level. Make sure that quick-release Switch off ignition. axle meets the recess for key surfaces. Fasten brake line in holder 2 and install screw 1.

• Page 175
  circumstances the high levels of heat radiation can damage the headlight assembly. Bulbs for low-beam headlight H7 / 12 V / 55 W Bulb for high-beam Remove cover 2 to replace Release wire spring 4 from headlight light source for high-beam catch on left and right and fold H7 / 12 V / 55 W headlight.
• Page 176
  Install cover. Replacing light source for left-hand parking light Park motorcycle, ensuring that support surface is firm and level. Switch off ignition. Install light source 5. Start by Push retainer 2 downward (us- inserting lug 6, then press light ing a screwdriver if necessary) source into socket.
• Page 177
  Replace defective light source. Bulb for parking light W5W / 12 V / 5 W To prevent dirt from being de- posited on the glass surface, always use a clean, dry cloth to hold the light source. Insert socket 3 in headlight Remove cover 1.
• Page 178
  Install cover. Replacing front and rear turn indicator light sources Park motorcycle, ensuring that support surface is firm and level. Switch off ignition. Remove light source 4 from Insert light source 4 in light socket. source socket. Replace defective light source. Bulb for parking light W5W / 12 V / 5 W To prevent contaminants from…
• Page 179
  Replace defective light source. Bulbs for flashing turn indicators, front RY10W / 12 V / 10 W Bulbs for flashing turn indicators, rear RY10W / 12 V / 10 W Pull glass on screw connection Install light source 1 by press- To prevent dirt from being de- side out of mirror housing.
• Page 180
  Pull license-plate light 1 out of If the taillight LEDs have failed, light housing. the taillight must be replaced. In this case: Contact an authorized service facility, preferably an authorized BMW Motorrad retailer. Press light source into socket. Remove light source from socket.

• Page 181: Fairings And Panels

  Press license-plate light 1 into Remove screw 1 on inside of Pull off connector 5 for turn light housing. fairing side panel. signal. Take off fairing side panel. Fairings and panels Protect vehicle connectors 6 against contamination. Remove fairing side panel NOTICE The working steps described here for the right fairing side…

• Page 182: Jump-Starting

  Jump-starting Installing fairing side panel CAUTION Touching live parts of the ig- nition system when the en- gine is running Electrocution Do not touch parts of the igni- tion system when the engine is Secure fairing side panel in running. grommet 3 and detent pin 4.

• Page 183: Battery

  Battery the other end to the positive Danger of short circuit terminal of the donor battery. Use jump leads fitted with fully Maintenance instructions insulated crocodile clips at both Then clamp one end of the Correct upkeep, recharging and black jumper cable to the ends.

• Page 184
  59). cable 2. NOTICE with anti-theft alarm system Connecting battery to (DWA) BMW Motorrad has developed a vehicle If necessary, switch off DWA. trickle-charger specially designed for compatibility with the elec- tronics of your motorcycle. Using this charger, you can keep the…

• Page 185: Fuses

  Consult a certified service fa- the battery before returning it to Do not bypass defective fuses. cility, preferably an authorized use. Replace defective fuses with BMW Motorrad retailer, for set- new fuses. Connecting battery to vehicle ting of the date. 182). Switch off ignition.

• Page 186
  Locking mechanism audibly 61). shop, preferably an authorized engages. Removing hump cover ( 60). BMW Motorrad retailer. with passenger package Install passenger seat ( 61). Installing fuse Installing hump cover ( 60). Squeeze locking levers to-…

• Page 187: Diagnostic Connector

  The diagnosis and information Installing hump cover ( 60). rized persons during your next system interface can be con- BMW Service appointment. nected at the diagnostic con- Chain nector 2. Have the work performed by Lubricate chain appropriately trained staff.

• Page 188
  To extend and maximize support surface is firm and the chain’s service life level. BMW Motorrad recommends using BMW Motorrad chain lubricant or: Using a screwdriver, push chain Lubricant in the middle between the pin- ion and chain sprocket and measure the difference A.
• Page 189
  Determine chain length below are identical on left and right. BMW Motorrad retailer. the rear wheel swinging arm Tighten locknuts 3 on left and above the center of 10 rivets at right to the specified torque.

• Page 191: Accessories

  Accessories General instructions ….190 BMW Motorrad ABS Pro ..190…

• Page 192: General Instructions

  Safety risk proved by BMW for this purpose. highway use applicable in your BMW Motorrad cannot exam- Your authorized BMW Motorrad own country. ine or test each product of out-…

• Page 193
  ABS Pro is purely a software up- date of the ABS control unit and the instrument panel. ABS Pro is an optional accessory and can be purchased and installed at your authorized BMW Motorrad retailer.

• Page 195: Care

  Care Care products ….. 194 Washing your motorcycle ..194 Cleaning sensitive motorcycle parts .

• Page 196: Care Products

  BMW Motorrad recommends hazard care products available at your that you use BMW Insect Re- Brake early until the brake ro- authorized BMW Motorrad mover to soften and wash off tors and brake pads are dry.

• Page 197: Cleaning Sensitive Motorcycle

  Damage to plastic surfaces ATTENTION salt, carefully clean chrome parts Do not use abrasive cleaners or with plenty of water and BMW Use of silicone sprays for cleaners containing alcohol or auto shampoo. Use chrome pol- care of rubber seals solvents.

• Page 198: Protective Wax Coating

  BMW Motorrad recommends sources of dirt, e.g. tree resin or from both wheels (preferably that you apply BMW Car Wax or pollen. using the front-wheel and another wax containing carnauba rear-wheel stands offered by…

• Page 199: Technical Data

  Technical data Troubleshooting chart … . . 198 Performance data ….212 Threaded fasteners ….199 Fuel.

• Page 200: Troubleshooting Chart

  Troubleshooting chart Engine does not start at all or is very difficult to start. Possible cause Remedy Side stand extended and gear engaged Retract side stand. Gear engaged and clutch not disengaged Place transmission in neutral or disengage clutch. No fuel in tank Refueling ( 90).

• Page 201: Threaded Fasteners

  Threaded fasteners Front wheel Value Valid Quick-release axle in threaded bush M24 x 1.5 37 lb/ft (50 Nm) Clamping screw in axle adapter M8 x 35 Tighten the screws 6 times, alternating between one and the other each time 14 lb/ft (19 Nm) Radial brake calipers on the axle adapter M10 x 65…

• Page 202
  Rear wheel Value Valid Swinging-arm adapter on rear wheel swinging arm M8 x 30 15 lb/ft (20 Nm) Screw on adjustment ring M5 x 25 2 lb/ft (3 Nm) without Dynamic Damping Control (DDC) Spring strut on main frame M10 x 65 — 10.9 41 lb/ft (56 Nm) Mirrors Value…

• Page 203: Fuel

  Fuel Recommended fuel quality Premium grade unleaded fuel (max. 10 % ethanol, E10) 91 AKI (98 ROZ/RON) 93 AKI Alternative fuel quality Super unleaded recommended (max. 10 % ethanol, E10) 89 AKI (95 ROZ/RON) 90 AKI Usable fuel quantity Approx. 4.6 gal (Approx. 17.5 l) Fuel reserve Approx.

• Page 204: Engine Oil

  SAE 5W-40, API SL/JASO MA2, Additives (for in- stance, molybdenum-based substances) are pro- hibited, because they would attack the coatings on engine components, BMW Motorrad recom- mends BMW Motorrad ADVANTEC Ultimate Oil. Engine oil, quantity for topping up max 0.8 quarts (max 0.8 l), Difference between…

• Page 205: Engine

  Engine Engine number location Lower right section of crankcase, behind coolant pump Engine type 104EA Engine design Water/oil-cooled 4-cylinder four-cycle in-line en- gine with four valves per cylinders and two over- head cams Displacement 999 cc (999 cm Cylinder bore 3.1 in (80 mm) Piston stroke 2 in (49.7 mm)

• Page 206: Clutch

  Clutch Clutch design Multi-disk oil-bath clutch, slipper clutch Transmission Transmission design Claw-shifted 6-speed transmission integrated in engine housing Transmission gear ratios 1.652 (76:46 teeth), Primary gear ratio 2.647 (45:17 teeth), 1st gear 2.091 (46:22 teeth), 2nd gear 1.727 (38:22 teeth), 3rd gear 1.500 (33:22 teeth), 4th gear 1.360 (34:25 teeth), 5th gear 1.261 (29:23 teeth), 6th gear…

• Page 207: Rear-Wheel Drive

  Rear-wheel drive Type of final drive Chain drive Type of rear suspension Two-arm aluminum swinging arm Number of teeth of rear-wheel drive (Pinion/ 17:45 sprocket) Secondary gear ratio 2.647 Frame Frame design Aluminum composite bridge frame, load-sharing engine Location of type plate Frame at front right on steering head Location of the vehicle identification number Frame at front right on steering head…

• Page 208: Suspension

  Suspension Front wheel Type of front suspension Upside-down telescopic forks Spring travel, front 4.7 in (120 mm), on wheel Rear wheel Type of rear suspension Two-arm aluminum swinging arm Type of final drive Chain drive Spring travel, rear 4.7 in (120 mm), on wheel Brakes Front wheel Type of front brake…

• Page 209: Wheels And Tires

  Wheels and tires Recommended tire combinations An overview of the current tire approvals is avail- able from your authorized BMW Motorrad retailer or on the Internet at bmw-motorrad.com. Speed category of front/rear tires W, minimum requirement: 168 mph (270 km/h)

• Page 210
  Front wheel Front wheel design Aluminum cast wheel Front-wheel rim size 3.50″ x 17″ Front tire designation 120/70 ZR 17 Load index for front tire Permissible front-wheel imbalance max 0.2 oz (max 5 g) Balance weight for front wheel (Half of each max 2.8 oz (max 80 g) weights must be attached on the right and left of the rim respectively)

• Page 211: Electrical System

  Tire pressure Tire pressure, front 36.3 psi (2.5 bar), with tire cold Tire pressure, rear 42.1 psi (2.9 bar), with tire cold Electrical system Fuses Fuse 1 10 A, Instrument cluster Fuse 2 4 A, Cutoff relay, diagnosis plug, anti-theft alarm system Fuse 3 Not in use…

• Page 212
  Battery Battery design AGM battery (Absorbent Glass Mat) with HP battery Lithium ion battery Battery voltage 12 V with HP battery 12.8 V Battery capacity 9 Ah with HP battery 5 Ah Spark plugs Spark plugs, manufacturer and designation NGK LMAR9D-J Electrode gap of spark plug 0.03 in (0.8 mm) Light sources…

• Page 213: Dimensions

  Dimensions Motorcycle length 80.7 in (2050 mm), over splash guard Motorcycle height 44.9 in (1140 mm), over windshield, at DIN un- laden weight Motorcycle width 32.5 in (826 mm), over mirrors Rider’s seat height 32.1 in (815 mm), Without driver Rider’s inside-leg arc, heel to heel 71.1 in (1805 mm), Without driver Weights…

• Page 214: Performance Data

  Performance data Top speed >124 mph (>200 km/h)

• Page 215: Service

  Service Reporting safety defects … 214 BMW Motorrad Service … . 215 BMW Motorrad Mobility Services ……215 Maintenance procedures .

• Page 216: Defects

  National Highway Traffic Safety Ad- ministration (NHTSA) in addition to notifying BMW of North America, LLC. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.

• Page 217: Bmw Motorrad Service

  BMW Motorrad The BMW Motorrad Mobility Ser- can attend to you and your vices furnish you and your new To ensure that your BMW con- motorcycle in over 100 countries BMW motorcycle with extra se- sistently remains in optimal con- around the globe.

• Page 218
  700 mls before the en- tered values. BMW Service The specified service intervals BMW Service is carried out once apply to street operation. For a year. The scope of the ser- racing operation, adjust the inter- vices performed may be depen- vals in accordance with loading.

• Page 221: Maintenance Schedule

  Maintenance schedule BMW running-in check BMW Service Standard Scope Engine oil change with fil- Check valve clearance Checking engine timing Replace all spark plugs Replacing air filter Telescopic fork oil change Change brake fluid in en- tire system annually or every…

• Page 222: Confirmation Of Maintenance

  Confirmation of maintenance work BMW Service standard scope The activities of the BMW Service standard scope are listed in the following. The actual scope of mainte- nance work applicable for your vehicle may differ. Performing the brief test using the BMW Motorrad diagnosis system…

• Page 223
  BMW Pre-Delivery BMW Running-in Check Check Conducted Conducted Odometer reading Next service at the latest or, if reached sooner Odometer reading Stamp, Signature Stamp, Signature…
• Page 224
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 225
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 226
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 227
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 228
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 229
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 230
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 231
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 232
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 233
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 234
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…
• Page 235
  BMW Service Work carried out Conducted BMW Service standard scope Engine oil change with filter Odometer reading Checking valve clearance Checking valve timing (cylinder head Next service cover removed) at the latest Replacing all spark plugs Replacing air cleaner element…

• Page 236: Confirmation Of Service

  Confirmation of service The table is intended as proof of maintenance and repair work, the installed optional accessories and any special campaign (recall) work carried out. Work carried out Odometer Date reading…

• Page 237
  Work carried out Odometer Date reading…

• Page 239: Appendix

  Appendix Certificate for Electronic Immobi- lizer ……. . 238…

• Page 240: Immobilizer

  FCC Approval This device complies with Any changes or modifi- Part 15 of the FCC rules. cations not expressly Ring aerial in the Operation is subject to the approved by the party ignition switch following two conditions: responsible for compliance (1) This device may not could void the user’s cause harmful inter-…

• Page 241
  Approbation de informations avec la clé de Toute modification contact via l’antenne qui n’aurait pas été la FCC annulaire. approuvée expressément Antenne annulaire Le présent dispositif est par l’organisme responsa- conforme à la partie 15 ble de l’homologation peut présente dans le des règles de la FCC.

• Page 242: Index

  Installing, 183 Parking lights on left, 174 Abbreviations and symbols, 6 Maintenance instructions, 181 Parking lights on right, 175 Position on motorcycle, 16 Replacing taillight, 178 ABS ProDisplay, 24 Removing, 183 Technical Data, 210 Control, 17 Technical data, 210 Turn indicators, 176 Indicator and warning light, 32 Brake fluid Warning light for light source…

• Page 243
  Coolant Engine Check fill level, 162 Adjusting control, 125 Engine-electronics warning Fluid level indicator, 15 Control, 17 light, 29 Topping up, 163 Indicator lamp, 33 Parking, 41 Warning light for Operating, 51 Starting, 82 overtemperature, 29 Self-diagnosis, 84 Technical Data, 203 Cruise-control system Switching off, 51 Warning light for engine…
• Page 244
  Front wheel stand Heated handlebar grips Laptimer Mounting, 153 Control, 18 Clear recording, 106 Fuel Operating, 58 Refueling, 90 Deleting lap, 106 Helmet holder Technical Data, 201 Display structure, 119 Position on motorcycle, 16 Fuel reserve End time entry, 99 Securing helmet, 61 Cruising range, 37 Fastest lap anticipated, 100…
• Page 245
  Operating parking lights, 42 Multifunction display, 19 Onboard tool kit Contents, 152 Control, 17 Parking lights, 42 Position on motorcycle, 16 Displays for racing mode, 94 Luggage Overview of warning Exiting settings, 114 Loading information, 80 indicators, 25 Luggage loops LAPTIMER Operating, 96 Overviews Position on motorcycle, 16…
• Page 246
  Pit-lane limiter Starting, 82 Safety instructions Adjust maximum speed, 123 Control, 18 On braking, 87 Operating, 128 Steering damper On riding, 80 Pre-Ride-Check, 83 Adjusting, 67 Seats Position on motorcycle, 15 Installing, 59 Steering lock Racetrack Locking mechanism, 11, 13 Locking, 40 Display for racing mode, 93 Removing, 59…
• Page 247
  Rear-wheel drive, 205 Turn indicators Overheating, 29 Control, 17 Spark plugs, 210 Overview, 22 Operating, 43 Standards, 7 Taillight and lights for parking Removing/installing, 133 lights defective, 31 Suspension, 206 Type plate Weights Transmission, 204 Position on motorcycle, 15 Load capacity table, 11, 13 Weights, 211 Technical Data, 211 Wheels and tires, 207…
• Page 249
  Errors and omissions excepted. © 2016 Bayerische Motoren Werke Aktiengesellschaft 80788 Munich, Germany Reprints and duplication of this work, in whole or part, are pro- hibited without the express writ- ten approval of BMW Motorrad, Aftersales.
• Page 250
  36.3 psi (2.5 bar), with tire cold Tire pressure, rear 42.1 psi (2.9 bar), with tire cold You’ll find additional information on all aspects of your motorcycle at: bmw­motorrad.com BMW recommends *01408382627* Order No.: 01 40 8 382 627 06.2016, 1st edition, 07…

MANUALSCAT | RU

Вопросы и ответы

У вас есть вопрос о BMW S 1000 RR (2017), но вы не можете найти ответ в пользовательском руководстве? Возможно, пользователи ManualsCat.com смогут помочь вам и ответят на ваш вопрос. Заполните форму ниже — и ваш вопрос будет отображаться под руководством для BMW S 1000 RR (2017). Пожалуйста, убедитесь, что вы опишите свои трудности с BMW S 1000 RR (2017) как можно более детально. Чем более детальным является ваш вопрос, тем более высоки шансы, что другой пользователь быстро ответит на него. Вам будет автоматически отправлено электронное письмо, чтобы проинформировать вас, когда кто-то из пользователей ответит на ваш вопрос.

BMW Motorrad

Rider’s manual

Welcome to BMW

We congratulate you on your choice of a vehicle from

BMW Motorrad and welcome you to the community of BMW riders. Familiarise yourself with your new vehicle so that you can ride it safely and confidently in all traffic situations.

About this Rider’s Manual

Please read this Rider’s Manual carefully before starting to use your new BMW. It contains important information on how to operate the controls and how to make the best possible use of all your BMW’s technical features. In addition, it contains information on maintenance and care to help you maintain your vehicle’s reliability and safety, as well as its value.

This record of the maintenance work you have had performed on

your vehicle is a precondition for generous treatment of goodwill claims.

If the time comes to sell your BMW, please remember to hand over this Rider’s Manual to the new owner. It is an important part of the vehicle.

Suggestions and criticism

If you have questions concerning your vehicle, your authorised BMW Motorrad dealer will gladly provide advice and assistance.

We hope you will enjoy riding your BMW and that all your journeys will be pleasant and safe

BMW Motorrad.

01 40 9 899 561

*01409899561*

*01409899561*

Table of Contents

1 General instructions …. 5

Overview . . . . . . . . . . . . . . . . . . . . . 6 Abbreviations and

symbols . . . . . . . . . . . . . . . . . . . . . . 6 Equipment . . . . . . . . . . . . . . . . . . . 7 Technical data . . . . . . . . . . . . . . . 7 Currentness . . . . . . . . . . . . . . . . . . 8 Additional sources of information . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Certificates and operating licences . . . . . . . . . . . . . . . . . . . . . . . 8 Data memory. . . . . . . . . . . . . . . . . 8 Intelligent emergency call system . . . . . . . . . . . . . . . . . . . . . . 12

2 General views ……….. 17

General view, left side . . . . . . . 19 General view, right side . . . . . 21 Underneath the seat . . . . . . . . 22 Multifunction switch, left . . . . 23 Multifunction switch,

right . . . . . . . . . . . . . . . . . . . . . . . . . 24 Instrument panel . . . . . . . . . . . . 25

3 Status indicators ……. 27

Indicator and warning

lights . . . . . . . . . . . . . . . . . . . . . . . . 28 TFT display in Pure Ride

view . . . . . . . . . . . . . . . . . . . . . . . . . 29 TFT display in view

menu . . . . . . . . . . . . . . . . . . . . . . . . 31 Warnings . . . . . . . . . . . . . . . . . . . . 32

4 Operation……………. 59

Ignition switch/steering

lock . . . . . . . . . . . . . . . . . . . . . . . . . 60 Emergency off switch (kill switch) . . . . . . . . . . . . . . . . . . . . . . 61 Intelligent emergency

call . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Lights . . . . . . . . . . . . . . . . . . . . . . . 64 Hazard warning lights sys-

tem . . . . . . . . . . . . . . . . . . . . . . . . . 66 Turn indicators . . . . . . . . . . . . . . 66 Dynamic Traction Control

(DTC) . . . . . . . . . . . . . . . . . . . . . . . 67 Riding mode . . . . . . . . . . . . . . . . 68 Cruise-control system . . . . . . . 70 Hill Start Control . . . . . . . . . . . . 73

Gearshift light . . . . . . . . . . . . . . . 76 Anti-theft alarm (DWA) . . . . . . 76 Tyre pressure monitoring

(RDC) . . . . . . . . . . . . . . . . . . . . . . . 78 Heated handlebar grips . . . . . 78 On-board computer . . . . . . . . . 79 Front and rear seats. . . . . . . . . 79

5 TFT display …………. 83

General instructions . . . . . . . . . 84 Principle . . . . . . . . . . . . . . . . . . . . . 85 Pure Ride view . . . . . . . . . . . . . . 91 General settings . . . . . . . . . . . . . 92 Bluetooth. . . . . . . . . . . . . . . . . . . . 93 My vehicle . . . . . . . . . . . . . . . . . . 97 Navigation . . . . . . . . . . . . . . . . . 100 Media . . . . . . . . . . . . . . . . . . . . . 102 Phone . . . . . . . . . . . . . . . . . . . . . 102 Display software

version . . . . . . . . . . . . . . . . . . . . 103 Display licence informa-

tion . . . . . . . . . . . . . . . . . . . . . . . . 103

6 Adjustment ………… 105

Mirrors . . . . . . . . . . . . . . . . . . . . 106 Headlight . . . . . . . . . . . . . . . . . . 106 Brakes . . . . . . . . . . . . . . . . . . . . 106 Adjust the clutch lever . . . . 107 Steering . . . . . . . . . . . . . . . . . . . 107 Spring preload . . . . . . . . . . . . 108 Damping . . . . . . . . . . . . . . . . . . 111 Riding height . . . . . . . . . . . . . . 114 Swinging arm . . . . . . . . . . . . . 116 DDC calibration . . . . . . . . . . . 118

7 Riding ……………… 119

Safety information . . . . . . . . . 120 Comply with checklist . . . . . 121 Always before riding

off: . . . . . . . . . . . . . . . . . . . . . . . . 121 At every third refuelling

stop . . . . . . . . . . . . . . . . . . . . . . . 122 Starting. . . . . . . . . . . . . . . . . . . . 122 Running in . . . . . . . . . . . . . . . . 124 Shifting gear . . . . . . . . . . . . . . 125 Gearshift light . . . . . . . . . . . . . 126 Brakes . . . . . . . . . . . . . . . . . . . . 127 Parking your motor-

cycle . . . . . . . . . . . . . . . . . . . . . . 129

Refuelling . . . . . . . . . . . . . . . . . 129 Securing motorcycle for transportation . . . . . . . . . . . . . 131

8 On the race track ….. 135

Displays for racing. . . . . . . . . 136 LAPTIMER . . . . . . . . . . . . . . . . 139 Vehicle settings for ra-

cing . . . . . . . . . . . . . . . . . . . . . . . 140 RACE PRO riding

modes . . . . . . . . . . . . . . . . . . . . 141 Launch Control . . . . . . . . . . . . 142 Pit Lane Limiter . . . . . . . . . . . 144 DTC . . . . . . . . . . . . . . . . . . . . . . . 145 Chassis and suspension settings for racing . . . . . . . . . 146 Removing and installing

mirrors . . . . . . . . . . . . . . . . . . . . 147 Removing and installing number-plate carrier . . . . . . . 151 Switching off ABS when

riding on the race track . . . 155 Deactivating intelligent emergency call when rid-

ing on the race track . . . . . . 157 Gearshift-pattern

reverser . . . . . . . . . . . . . . . . . . . 158

9 Engineering

details …………….. 161

General instructions . . . . . . . 162 Antilock Brake System

(ABS) . . . . . . . . . . . . . . . . . . . . . . 162 Dynamic Damping Control (DDC) . . . . . . . . . . . . . . . . . . . . . 165 Dynamic Traction Control

(DTC) . . . . . . . . . . . . . . . . . . . . . 166 Riding mode . . . . . . . . . . . . . . 167 Dynamic Brake Control . . . . 169 Tyre pressure control

(RDC) . . . . . . . . . . . . . . . . . . . . . 170 Shift assistant . . . . . . . . . . . . . 172 Hill Start Control . . . . . . . . . . 173

10 Maintenance ……… 175

General instructions . . . . . . . 176 Toolkit. . . . . . . . . . . . . . . . . . . . . 176 Front-wheel stand . . . . . . . . . 177 Rear-wheel stand . . . . . . . . . 178 Engine oil . . . . . . . . . . . . . . . . . 179 Brake system . . . . . . . . . . . . . 181 Clutch . . . . . . . . . . . . . . . . . . . . . 186 Coolant. . . . . . . . . . . . . . . . . . . . 187 Tyres . . . . . . . . . . . . . . . . . . . . . . 188

Rims and tyres . . . . . . . . . . . . 189 Wheels . . . . . . . . . . . . . . . . . . . . 189 Lighting . . . . . . . . . . . . . . . . . . . 197 Body panels . . . . . . . . . . . . . . . 197 Jump-starting . . . . . . . . . . . . . 201 Battery . . . . . . . . . . . . . . . . . . . . 202 Fuses . . . . . . . . . . . . . . . . . . . . . 205 Diagnostic connector . . . . . . 206 Chain . . . . . . . . . . . . . . . . . . . . . . 207

11 Accessories ……… 211

General instructions . . . . . . . 212 Connector for optional accessories . . . . . . . . . . . . . . . . . . 212 M Cover Kit . . . . . . . . . . . . . . . 215

12 Care ……………… 217

Care products . . . . . . . . . . . . . 218 Washing the vehicle . . . . . . . 218 Cleaning easily damaged components . . . . . . . . . . . . . . . 219 Care of paintwork . . . . . . . . . 220 Vehicle preservation . . . . . . . 220 Laying up the motor-

cycle . . . . . . . . . . . . . . . . . . . . . . 220 Restoring motorcycle to

use . . . . . . . . . . . . . . . . . . . . . . . . 221

13 Technical data …… 223

Troubleshooting chart . . . . . 224 Screw connections . . . . . . . . 227 Fuel . . . . . . . . . . . . . . . . . . . . . . . 230 Engine oil . . . . . . . . . . . . . . . . . 231 Engine . . . . . . . . . . . . . . . . . . . . 231 Clutch . . . . . . . . . . . . . . . . . . . . . 233 Transmission . . . . . . . . . . . . . . 233 Rear-wheel drive . . . . . . . . . . 234 Frame . . . . . . . . . . . . . . . . . . . . . 234 Chassis and

suspension . . . . . . . . . . . . . . . . 235 Brakes . . . . . . . . . . . . . . . . . . . . 236 Wheels and tyres. . . . . . . . . . 237 Electrical system . . . . . . . . . . 239 Dimensions . . . . . . . . . . . . . . . 241 Weights . . . . . . . . . . . . . . . . . . . 241 Riding specifications . . . . . . 242

14 Service …………… 243

BMW Motorrad Service . . . 244 BMW Motorrad Service

history . . . . . . . . . . . . . . . . . . . . . 244 BMW Motorrad mobility services . . . . . . . . . . . . . . . . . . . 245 Maintenance work . . . . . . . . . 245

BMW Service . . . . . . . . . . . . . 245 Maintenance schedule . . . . 249 Maintenance confirma-

tions . . . . . . . . . . . . . . . . . . . . . . . 250 Service confirmations . . . . . 264

15 Appendix…………. 267

Certificate for electronic immobiliser . . . . . . . . . . . . . . . . 268 Certificate for tyre pressure control (RDC) . . . . . . . . . . . . . 270 Certificate for TFT instru-

ment cluster . . . . . . . . . . . . . . . 271

16 Index …………….. 274

General instructions

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Abbreviations and symbols . . . . . . . . . . 6 Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Technical data . . . . . . . . . . . . . . . . . . . . . . . 7 Currentness . . . . . . . . . . . . . . . . . . . . . . . . . 8 Additional sources of information . . . . 8

Certificates and operating

licences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Data memory . . . . . . . . . . . . . . . . . . . . . . . . 8

Intelligent emergency call

system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

General views

General view, left side. . . . . . . . . . . . . . . 19 General view, right side . . . . . . . . . . . . . 21 Underneath the seat . . . . . . . . . . . . . . . . 22 Multifunction switch, left . . . . . . . . . . . . 23 Multifunction switch, right . . . . . . . . . . . 24 Instrument panel . . . . . . . . . . . . . . . . . . . . 25

General view, right side

1Brake-fluid reservoir, rear ( 185)

2Vehicle identification number (on the steering-head bearing)

Type plate (on the steering-head bearing)

3Brake-fluid reservoir, front ( 184)

4Check coolant level ( 187)

5Engine oil level indicator ( 179)

6Oil filler opening ( 181)

Underneath the seat

1Battery ( 202)

2Rider’s manual

3Toolkit ( 176)

4Diagnostic connector ( 206)

5Fuses ( 205)

Multifunction switch, left

1DTC Switching off ( 67)

2High-beam headlight and headlight flasher ( 65)

3with cruise controlOE Switching on cruise control ( 70).

4Hazard warning lights system ( 66)

5with riding modes ProOE DTC Adapting ( 145).

6Turn indicators ( 66)

7Horn

8Multi-Controller Controls ( 85)

9MENU rocker switch ( 85)

Multifunction switch, right

1 with heated gripsOE Heated handlebar grips ( 78).

2Riding mode ( 68)

3Emergency off switch (kill switch) ( 61)

4Starter button Starting the engine ( 122).

Race start with Launch Control ( 142)

5SOS button

Intelligent emergency call ( 62)

Instrument panel

1Indicator and warning lights ( 28)

2Gearshift light ( 126)

5Photosensor (for adapting the brightness of the instrument lighting)

Status indicators

Indicator and warning lights . . . . . . . . . 28 TFT display in Pure Ride view . . . . . . 29 TFT display in view menu . . . . . . . . . . 31 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Indicator and warning lights

1Turn indicators, left Operating the turn indicators ( 66).

2High-beam ( 65)

3General warning light ( 32)

4Turn indicators, right

5— with export to EU marketsNV

Malfunction indicator lamp

6DTC ( 52)

7ABS ( 155)

TFT display in

Pure Ride view

1Hill Start Control ( 55)

2Engine speed display ( 91)

3Speedometer

4Driver info. status line ( 89)

5with cruise controlOE Switching on cruise control ( 70).

6RACE PRO riding mode with riding modes ProOE

Configuration for the race track ( 141)

7Switching Speed Limit Info on or off ( 91).

with riding modes ProOE DTC Adapting ( 145).

8Riding mode ( 68)

9Recommendation to upshift ( 92)

10Gear indicator; «N» indicates neutral.

TFT display in view menu

1Hill Start Control ( 55)

2Speedometer

3with cruise controlOE Switching on cruise control ( 70).

4Switching Speed Limit Info on or off ( 91).

with riding modes ProOE DTC Adapting ( 145).

5 RACE PRO riding mode with riding modes ProOE

Configuration for the race track ( 141)

6Riding mode ( 68)

7Driver info. status line ( 89)

8Recommendation to upshift ( 92)

9Gear indicator; «N» indicates neutral.

10Clock

11Connection status