Руководство по эксплуатации microlab

Operation Instruction:

A. Operation by hand(as diagram 1):

1. Turn on the power switch on the back of the subwoofer, the system into

ST-BY mode, the ST-BY/MUTE LED is lighted, turn the master volume

knob to turn on the system.

2. Press INPUT SEL button to select the audio input mode between

5.1CH/CD and AUX.

3. Turn the master volume knob to adjust the volume level.

B. Operation by remote control(as diagram 2):

1.While ST-BY mode,ST-BY/MUTE LED is lighted, other indicator off. Press

ST-BY key, the system turn on, the ST-BY/MUTE LED off

2.Press INPUT SEL key to select 5.1CH/CD or AUX.

3.Press MODE key to select 5.1CH or 2.1CH output.

4.Press Volume +/- key adjusting Volume, adjusting range 0-80dB (default

40dB). (1)press VOLUME+, VOLUME LED is flashed, until 80dB the LED

flashed stop. (2)press VOLUME-, VOLUME LED is flashed, unitl 0dB the

LED flashed stop.

5.Press SUB-WOOF +/- key adjusting subwoofer volume, adjusting range

+/-7 dB (default 0dB). While press SUB-WOOF +/- key, the VOLUME LED

is flashed as above.

6.Press CENTER +/- adjusting the CENTER VOLUME, adjusting range

+/- 7dB, and the CENTER LED is flashed.

7.Press SURR +/- key adjusting the tone of surround, adjusting range

+/- 7dB, and the VOLUME LED is flashed.

8.Press MUTE key,the sound will be muted,and the ST-BY/MUTE LED is

flashed, press again or press Volume key, the MUTE off.

9.Press RESET key, the adjusted SUB-W +/-,CENTER+/- and SURR +/-

Volume reset to normal(0dB).

Specification

*Amplifier specification:

AC IN

220V-240V~ 50Hz 300mA

Power output

22W+8Wx5 RMS

Frequency response

30Hz-20KHz

Sensitivity

350mV

Harmonic distortion

<0.3% 1W 1KHz

S/N

>80dB

Separation

>45dB

*Speaker unit:

Subwoofer 5.25″ magnetically shielded

Satellite 2.5″x5 magnetically shielded

*Audio input:

RCA

*Audio output:

RCA

*Product size:

DxWxH

Subwoofer

340x165x240mm

Satellites

85x100x165mm

80-M860-97-0001-02 2008-07-04出

Inside Package:

Subwoofer speaker

1 pc

Satellite speaker

5 pcs

3.5ST-2RCA audio cable

1 pc

2RCA-2RCA audio cables

3 pcs

Remote control

1 pc

User manual

1 pcs

System Connection(as diagram 3):

Warning: before connecting the speakers, make sure that the power plug is

disconnected from the AC outlet.

1. Connect Front Left/Right, Center, Surround Left/Right speaker cables to

the appropriate audio output jacks on the back of the subwoofer.

2.Connect one end of the 2RCA-2RCA audio cable to the appropriate

5.1CH/CD input jacks of the Front Left/Right, Center, Surround Left/Right

channel on the back of the subwoofer, the other end to the appropriate

audio output jacks on the DVD or the other audio source.

3.If connect to any 2-channel audio source, just connect one end of the

2RCA-2RCA audio cable to the R/L AUX input jacks on the back of the

subwoofer.

4.If connect to PC soundcard or any audio source only with headset output,

then please use the 2RCA-3.5mm audio cable.

5.the jacks and plugs are color-coded. Be sure to attach each color-coded

plug to a matching color coded jack.

6.Make sure all the cables are connected correctly, connect the power plug

to the correct AC outlet.

Remarks the system positioning:

* The system is magnetically shielded which could be positioned besides

the PC monitor or near the TV.

* Please refer to sound card instruction when connect 5.1 channel sound

card.

* Statement indicating that the socket-outlet shall be installed near the

equipment and shall be easily accessible.

* The highest environmental temperature suitable for this product is 40

Caution:

1. Do not exposed to dripping or splashing.

2. Do not placed any objects filled with water over the apparatus.

3. Do not block the ventilation holes.

4. For indoor use only.

5. When using high output signal, please don’t turn the volume to

maximum to avoid distortion.

6. In case of long time not using, please plug off the power plug.

(Diagram 1) Front Panel

VOLUME

―

+

AUX

G

CD

2.1

5.1

R

5.1

STBY/MUTE

VOLUME

INPUT

OUTPUT

INPUT SEL

Controls on the front of Subwoofer

1. Remote Control Signal Receiving Window and LED display

2. Master Volume Knob:

The master volume could be adjusted either by hand or remote control

3. Input selection button

(Diagram 3)

To computer 5.1 channel sound

FRONT R

SURROUND R

o

C.

(Diagram 2) Remote Control

1

Stand by

2

Input selection

Surround fine adjusting

3

Volume- control

To stereo audio source

card or DVD player

L

R

FL

FR

CEN

SW

SL

SR

AUDIO OUTPUT

FR

SR

CEN

FL

SL

FUSE

T630mAL250V

AC IN

ON

OFF

*Please note the correct placement of speaker is shown in the above picture.

AMPLIFIED SPEAKER

AMPLIFIED SPEAKER

M-860

M-860

User Manual

User Manual

Reset

ST-BY

MUTE

Mute

INPUT SEL RESET

MODE

Output Mode

SURR+

CENTER+ SUB-W+

Center fine adjusting

SURR-

CENTER- SUB-W-

Subwoofer fine adjusting

VOLUME —

VOLUME +

Volume + Control

CENTER

FRONT L

SURROUND L

Amplifier

Audio system

Cables and connectors

Docking Station

Headphone

Home Cinema speakers

Home Theater System

Media Player

Micro Music System

Portable Speakers

Power Pack

Repeater

Speaker System

Speakers

Stereo System

Subwoofer

Transceiver

Two-Way Radio

В настоящее время вы находитесь на странице с руководствами . Выберите одну из категорий продуктов, чтобы быстро найти нужное руководство . Не удалось найти нужный продукт ? Тогда попробуйте вбить в строку поиска и модель, чтобы найти нужное руководство . На ManualsPDF.ru в настоящее время имеется 36 руководств , разделенных на 6. Самые популярные категории продуктов :

• Колонки
• Подставки для подзарядки / док-станции
• Без категории

Самые популярные продукты из на сегодня:

• Microlab B 77
• Microlab Solo 6C
• Microlab M-860