Smart pos system p1 w6900 инструкция

Power button

Volume buttons

Menu buttonHome buttonReturn button

Instructions for charging and battery

This device supports charging by USB cable or dock.

· Connect the 5V adapter to the power supply socket.

· Connect the USB cable to USB interface of the device.

· The screen will display charging icon during charging.

· Please check the USB connect if there is no charging icon.

Instructions/Notes for battery

· This device adopts 3.6V/5200mAh Lithium battery, please don’t

remove the battery.

· In order to protect the battery life, please charge your device

whenever possible and don’t let battery to fully drain before

charging.

Open handle

NFC reader

①

③

②

SIM card slot

Battery

Battery cover

Indicator light

Printer

Speaker

IC card reader

Magnetic card reader

Ultra-simple setting

Trouble shooting

Printer not working

· Make sure the cover of paper container is closed correctly.

· Make sure the right printing pater is used and fed.

· Check whether 58mm × 40mm thermal paper roll is fed into the

paper container.

· If the printed paper is blank, please check whether the paper roll

has been installed in the correct direction.

The device can’t be power on(eg, exhausted battery).

· Connect the device properly with a USB cable to charge for

three minutes.

· Check whether the charging icon is displayed or not.

What we can do if the system freezes

Press the power button for 11 seconds to reboot.

Printing paper

SIM

SAM card slot

Strap ring

USB interface

Indicator light

Remind the payment steps for band card.

USB interface

Use for charging or developer debugging.

Camera

5M Auto Focus, 1D&2D scanner.

Flash light

For lighting in camera mode.

SAM card slot

For inserting encrypted SAM cards.

SIM card slot

Note: To prevent system errors, please make sure the device is off when

you insert or remove the SIM card.

· Move the battery cover horizontally to open.

· Insert/remove SIM card in the direction as shown.

· Fasten the battery cover horizontally.

（Support GSM/CDMA/WCDMA/TDS CDMA/EVDO/LTE SIM card.）

Battery

Avoid contacting with water, metal material and other electrically

equipment while in use.

Strap ring

For fixing handheld strap to prevent slippage.

Extend pins

To connect to dock.(Need to buy dock separately)

Printing instructions

This device support 58mm thermal paper with the specification of

57±0.5mm×Ø40mm

· Please open pater container with open handle, as shown in

Fig.1. Please don’t open directly to damage print gear.

· Put the paper correctly into the pater container as shown and

pull some paper outside the cutter, as shown in Fig.2.

· Close the cover of pater container to finish print paper feeding,

as shown in Fig.3.

Note: If the printed paper is blank, please check whether the paper roll has

been installed wrong.

Only a few steps to start the smart business device

① 2G/3G/4G settings, in the power-off status, insert related 2G(GSM/CD-

MA)/3G(WCDMA/TDS CDMA/EVDO)/4G(LTE) SIM card and then power it on.

(For card support details, please read the technical specification table)

② Long-press the power button for 2 to 3 seconds, and then the screen is

lightened. Enter the first power-on interface and just operate according to

instructions. The device provides two Internet accessing modes for selection.

③ WIFI setting

·Click the [setting] button, then enable WLAN, enter the WLAN search

interface, and wait for its search for accessible WLAN hotspots and the

result;

·Click on the WLAN you want to connect to. If you select an encrypted

network, you need to enter the access code to connect.

How to download/un-install applications

In the networked mode, open the application market, browse and download

applications to complete the installation of related applications.

Camera

Flash light

Extend pins

Software uninstall method: select «Settings-> Applications-> Manage

Applications-> Uninstall» to uninstall the application; or long press the

icon to drag it to the trash to uninstall.

USB interface

supply socket

Adapter

Power button

Short Press:

Wake up the screen, lock the screen.

Long Press:

Long press for 2-3 seconds in power off mode switches on the

device.

Long press for 2-3 seconds in normal operation mode selects

power off or reboot.

Long press for 11 seconds when system is frozen automati cally

reboots.

Volume buttons

Volume adjusts. These buttons can be set as quick scan button by

app setting.

Printer

For printing sales slips in power on mode.

Return button

Tap to return to the previous screen.

Home button

Tap to quickly go back home screen.

Menu button

Tap to quickly view the background apps.

Select the app and slide laterally to close.

Magnetic card reader

Read the magnetic stripe information of bank cards.

IC card reader

Read the chip-based band cards.

NFC reader

Read the contactless card information.

Please read “Help App” in the device

for more information on user’s guidance

Name and Content of Toxic or Harmful

Substances in this Product

Means that the content of the toxic or harmful substance

in all homogeneous materials of this part is below the limit

stipulated in SJ/T11363-2006.

Means that the content of the toxic or harmful substance in

at least one of the homogeneous materials of this part is

beyond the limit stipulated in SJ/T11363-2006; but as for

the component marked with “×” on the table, the content is

beyond the l imit since there is no alternative mature

technology

in the industry yet.

Part Name

Components of circuit board

Lead

（Pb）

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

chromium

(Cr(VII)

Polybrominated

biphenyls

(PBB)

Polybrominated

diphenyl ethers

(PBDE)

Toxic or Harmful

Substances

or Elements

The products reaching or exceeding the environmental service

life shall be recycled per “Regulations on the Control and

Management of Electronic Information Products” and shall not

be littered.

Precautions

Product technical specifications

Camera 500W AF

FLASH 8GB Nand Flash

CPU MTK 6737

CPU basic

frequency Quad-core 1.3GHz

Keys Power key, volume key,

Display 5.5 inch IPS, resolution 1280*720

Operating

system Android 6.0

Bluetooth Support of bluetooth 3.0/4.0BLE and iBeacon

RAM 1GB LPDDR3

Interfaces USB Type C，SIM、PSAM、USB OTG

Printer type Thermal Printer

Printer paper

spec Width 58mm, maximum diameter 40mm

Touch screen Capacitive multi-touch screen, supportive of the glove mode

Wireless data

2G：B2/B3/B5/B8

3G：wcdma(B1/B2/B4/B5);EVDO(BC0/BC1)

4G：B2/B4/B7/B17/B28

Item Technical Specifications

Package content

One host

One user guide (including package content, product warranty

card and product qualification certificate)

One power adapter

One USB cable

Battery 3.6V/5200mAh

IC card reader ISO7816EMV2000PBOC3.0

Contactless

card reader ISO 1443A/B

SAM Slot ISO7816

Magnetic card

reader Track 1/2/3, Bi-directional, ISO7810/7811/7813

Outline

dimensions L211 mm × W83 mm × H54 mm

Adapter OUTPUT：DC5V/2A

INPUT：AC100~240V/0.3A 50/60Hz

Safety Warning

· Insert the AC plug into the AC socket-outlet corresponding

to the identification input on the accessory power adapter;

· It must not be used where there is any potential explosive

gas;

· This is a Class A product. In a living environment, this prod

uct may cause radio interference.

In this case, the user may need to take practical measures

against the interference.

· bout battery replacement:

① There is a risk of explosion if you replace the battery with

a wrong type!

② The replaced battery shall be handed over to repair per

sonnel disposal. Do not throw it into the fire!

Important Safety Instructions

· Try not to install or use the device during lightning, or else

there would be lightning stroke danger;

· When you find unusual smell, overheat or smoke, please cut

off the power immediately;

· Be cautious of the sharp paper knife, and please do not

touch! ！

Suggestions

· Do not use it in extremely cold or hot conditions (e.g., near

fire or a lighted cigarette);

· Do not drop, throw or bend it;

· Try to use it in a clean and dustless environment and avoid

tiny articles falling into the terminal;

· Do not use it near medical equipment without permission.

Declaration

The company shall not be responsible for the following actions

· Any damage caused by not using and maintaining it under the

conditions described in the guide;

· Any damage or problem caused by optional parts or con

sumptive materials (not the original products provided by the

company or approved products), the company will assume no

responsibility for this. It is not allowed to modify or change

the product without the consent of the company.

· The operating system of this product supports official system

update. If users install ROM system from the third party or

modify the system files by means of cracking, it may lead to

system instability, as well as security risk and security threat.

Disclaimer

Owing to the update of the product, some details of this docu—

ment may not be in conformity with those of the product.

Please refer to the material object. The company reserves the

right to interpret this document. The company reserves the

right to modify this instruction book without prior notice.

Smart POS System

User’s Guide

Wi-Fi Build-in WIFI 802.11 a/b/g/n（2.4G/5G）

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

FCC ID: 2AH25W6900

NOTE: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more

of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

Body-worn Operation

This device was tested for typical body-worn operations. To comply

With RF exposure requirements, a minimum separation distance of

1.0cm must be maintained between the user’s body and the handset,

including the antenna.

Third-party belt-clips, holsters, and similar including the antenna.

Third-party belt-clips, holsters, and similar accessories used by this

device should not contain any metallic components. Body-worn

accessories that do not meet these requirements may not comply with

RF exposure requirements and should be

avoided.

Specific Absorption Rate (SAR) information:

This wireless phone meets the government’s requirements for exposure

to radio waves. The guidelines are based on standards that were

developed by independent scientific organizations through periodic and

thorough evaluation of scientific studies. The standards include a

substantial safety margin designed to assure the safety of all persons

regardless of age or health.

FCC RF Exposure Information and Statement. The SAR limit of USA

(FCC) is 1.6W/kg averaged over one gram of tissue.

Device types: W6900 has also been tested against this SAR limit. The

highest SAR value reported under this standard during product certifica-

tion when properly worn on the body is 1.856W/kg（10gSAR， test

distance：0mm，limit 4W/kg）and 1.477W/kg (1gSAR， test distance

：5mm，limit 1.6W/kg). This device was tested for body-worn

operations with the back of the handset kept 0mm and 5mm from the

body. To maintain compliance with FCC RF exposure requirements, use

accessories that maintain a 0mm and 5mm separation distance between

the user’s body and the back of the handset. The use of belt clips,

holsters and similar accessories should not contain metallic components

in its assembly. The use of accessories that do not satisfy these

requirements may not comply with FCC RF exposure requirements, and

should be avoided.

Manufacture

Room 505 No.388 Song Hu Road Shanghai, China

Technical features and characteristic

the product includes the following features and characteristics：

GSM850

GSM1900

WCDMA bandII

WCDMA bandIV

WCDMA bandV

LTE Band 2

LTE Band 4

LTE Band 7

LTE Band 17

CDMA BC0

CDMA BC1

BT

BLE

Operation Frequency

824MHz-849MHz

1850MHz-1910MHz

1850MHz-1910MHz

1710MHz-1755MHz

824MHz-849MHz

1850MHz-1910MHz

1710MHz-1755MHz

2500MHz-2570MHz

704MHz-716MHz

824MHz-849MHz

1850MHz-1910MHz

2402MHz-2480MHz

2402MHz-2480MHz

Transmitted

33dBm

29dBm

21.5dBm

22.5dBm

22.5dBm

23.5dBm

23.5dBm

21.5dBm

23.5dBm

22dBm

21.5dBm

-1dBm

6dBm

wifi

2412MHz-2462MHz

5150MHz-5250MHz

5250MHz-5350MHz

5725MHz-5850MHz

18dBm

18.5dBm

Related Documents

	I18D00082 External Photo	External Photos
	I18D00082 Internal Photo	Internal Photos
	I18D00082 Internal Photo	ID Label/Location Info
	UM-V1	Users Manual



Беспроводной платежный smartPOS-терминал P2

Отличительная черта данного терминала – инновационность! Такое оборудование трудно не заметить: новое
устройство привлекает внимание, т.к. на рынке оно представлено впервые, позволяет быстро оплачивать ваши
товары и услуги с использованием банковских карточек, выделяет на фоне конкурентов, облегчает вашу работу и
делает повседневные операции быстрее.

Обслуживание платежей (эквайринг) выполняют: ЗАО «МТБанк», ОАО
«Белгазпромбанк», ОАО «Банк БелВЭБ», ОАО «АСБ Беларусбанк», ОАО «Паритетбанк», ОАО «Белаграпромбанк», «ЗАО БСБ
Банк», «Приорбанк» ОАО.

За полную стоимость:

1050.00

С услугой эквайринга
от ОАО «Банк БелВЭБ»:

900.00

Внимание! Рассрочка предоставляется при стоимости оборудования от 3000 бел.руб. в рамках партнерского
продукта

ЗАО «МТБанк» — «ЗАРАЗ»

только для клиентов, у которых есть оборот по расчетному счету в течение предыдущих 3 месяцев.

В рамках
партнёрской программы «Мост» от Беларусбанка рассрочка предоставляется без
ограничения суммы на выбор периода: 3, 6 или 12 месяцев.

В аренду:

(ставка арендной платы,
действует с 01.04.2022)

66.00

Все цены указаны в белорусских рублях с НДС

Компактная, удобная, современная мобильная программная касса zPOS P2 с возможностью приема оплаты за товары и услуги,
как за наличные, так и при помощи банковских пластиковых карт.

Купить программную кассу нового поколения означает получить сразу несколько встроенных устройств в одном: кассовый
аппарат, терминал для приема оплаты по банковским карточкам (в том числе с помощью носимых гаджетов: смартфонов,
смарт-часов, смарт-браслетов подключенных к Samsung Pay или Apple Pay), 2D-сканер штрих-кодов, а также чековый
принтер.

Преимущества:

• Возможность приема всех типов банковских карт (с магнитной полосой, с чипом, бесконтактные) платежных систем Visa,
  Mastercard, БЕЛКАРТМИР, UnionPay
• Несколько вариантов подключения к Интернет (WIFI, 3G4G) для связи с банком-эквайером и оператором программной
  кассовой системы
• Высокоскоростной чековый принтер
• Современный, стильный дизайн

Сферы применения:

Cфера торговли, общественного питания (не обеспечивает выдачу счета и может использоваться в объектах общественного
питания без обслуживания потребителей официантами (барменами) за столиками), услуг (кроме автомобильных перевозок
пассажиров, автозаправочных станций), за исключением случаев, когда в этих сферах в соответствии с законодательством
для приема денежных средств используются специальные компьютерные системы.

Операционная система:

Android 7.1

Процессор:

quad-core 1.3GHz

Дисплей:

5.5″, HD+, 1440*720, multi-touch

WI-FI:

Поддержка IEEE 802.11 a/b/g/n 2.4GHz/ 5GHz

Bluetooth:

Поддержка BLE 2.1/3.0/4.2

Мобильная передача данных:

2G/3G/4G

Чековый принтер:

Ширина рулона: 58mm;
Диаметр рулона: 40mm;
Скорость печати: 70mm/сек

Аккумулятор:

Литий-полимерный, 7.6V/ 2540 mAh

Адаптер питания:

Вход: AC 100~240V Выход: DC 5V/2A

Камера:

5.0MP, подсветка, AF

Физические кнопки:

Кнопка включения (блокировка экрана), программируемая дополнительная кнопка

Физические интерфейсы:

1 x USB Type C с поддержкой OTG для подключения адаптера питания или СКО;
2 x nano SIM слот;
1 x MINI SAM слот

Размеры устройства:

222*81.6*17.6mm

Условия:

эксплуатация: температура 0℃ ~ 50℃, влажность 10% ~ 90% (без конденсата)
хранение: температура -20℃ ~ 60℃, влажность 5% ~ 95% (без конденсата)

Считыватели банковских карт:

с магнитной полосой (track 1/2/3 двунаправленное чтение, ISO7810/7811);
c чипом (EMV, ISO7816/PBOC3.0);
бесконтактные (Type A/B, ISO/IEC 14443, ISO18092)

Сертификаты:

EMV Contact L1 & L2, EMV Contactless L1 , PCI PTS 5.х;
Visa PayWave, MasterCard PayPass, UnionPay QuickPass, БЕЛКАРТ/МИР;
ТР ТС 004/2010 «О безопасности низковольтного оборудования»;
ТР ТС 020/2010 «Электромагнитная совместимость технических средств»;
ТР ЕАЭС 037/2016 «Об ограничении применения опасных веществ в изделиях электротехники и радиоэлектроники»;
ТР 2018/24/BY (СТБ 1356-2011 «Системы сотовой подвижной электросвязи. Общие технические требования» (пп. 5.10,
5.13, 5.16, 5.19);
СТБ 1788-2009 «Радиосвязь Оборудование беспроводного широкополосного доступа. Требования к параметрам
радиоспектра, электромагнитной совместимости и безопасности» (пп. 5.1.5, 5.2, 5.3);
ГОСТ IEC 60950-1-2014 «Оборудование информационных технологий. Требования безопасности. Часть 1. Общие требования»
(пп. 1.7, 2.1, 2.2);
ГОСТ IEC 62479-2013 «Оценка маломощного электронного и электрического оборудования на соответствие основным
ограничениям, связанным с воздействием на человека электромагнитных полей (10 МГц — 300 ГГц)»;
ГОСТ IEC 62311-2013 «Оценка электронного и электрического оборудования в отношении ограничений воздействия на
человека электромагнитных полей (0 Гц-300 ГГц)».

Комплект поставки терминала smartPOS-терминал P2

Устройство;

Адаптер питания (зарядное устройство);

Кабель к адаптеру питания;

USB type-c кабель / переходник для внешнего подключения СКО;

Рулон чековой ленты;

Инструкция по эксплуатации.

Решаем любые проблемы с техникой.
Сервисный центр «ПОРТ»

• Авторизованный сервисный центр для 22 производителей

• Услуги по монтажу, настройке, ремонту всего спектра оборудования

• Аккредитованные специалисты

• Выезд по городу

• 25 лет на рынке

• Доставка оборудования в сервисный центр

Все кассы

MSPOS-Е-Ф — компактная современная мобильная онлайн-касса со встроенным сертифицированным эквайрингом с возможностью оплаты как наличными, так и банковской картой.

22 900 ₽

Рассрочка на 6 мес. от 3816 руб.

Доставим за 48 часов кассу под ключ по Москве и РФ!

С регистрацией в ФНС по 54-ФЗ

Без посещения инспекции

app
s Applicant Information 1 2 3 4 5 6 7 8 Effective 2019-08-01
1 2 3 4 5 6 7 8 2018-06-27
1 2 3 4 5 6 7 8 Applicant’s complete, legal business name Shanghai Sunmi Technology Co.,Ltd.
1 2 3 4 5 6 7 8 FCC Registration Number (FRN) 0025501644
1 2 3 4 5 6 7 8 Physical Address Room 605, Block 7, KIC Plaza, No.388 Song Hu Road Yang Pu District
1 2 3 4 5 6 7 8 Room 605, Block 7, KIC Plaza, No.388 Song Hu Road
1 2 3 4 5 6 7 8 Shanghai
1 2 3 4 5 6 7 8 Shanghai, 200433
1 2 3 4 5 6 7 8 China
app
s TCB Information 1 2 3 4 5 6 7 8 TCB Application Email Address h******@acbcert.com
1 2 3 4 5 6 7 8 TCB Scope B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
1 2 3 4 5 6 7 8 A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
1 2 3 4 5 6 7 8 A4: UNII devices & low power transmitters using spread spectrum techniques
app
s FCC ID 1 2 3 4 5 6 7 8 Grantee Code 2AH25
1 2 3 4 5 6 7 8 Equipment Product Code W6900
app
s Person at the applicant’s address to receive grant or for contact 1 2 3 4 5 6 7 8 Name Z**** W****
1 2 3 4 5 6 7 8 Title Manager
1 2 3 4 5 6 7 8 Telephone Number 18721********
1 2 3 4 5 6 7 8 Fax Number 18721********
1 2 3 4 5 6 7 8 E-mail z******@sunmi.com
app
s Technical Contact 1 2 3 4 5 6 7 8 Firm Name East china institute of Telecommunications
1 2 3 4 5 6 7 8 Name A**** Y********
1 2 3 4 5 6 7 8 Physical Address 7F, G Area,No. 668, Beijing East Road
1 2 3 4 5 6 7 8 Shanghai,, 200001
1 2 3 4 5 6 7 8 Shanghai, 200001
1 2 3 4 5 6 7 8 China
1 2 3 4 5 6 7 8 Telephone Number 86-21********
1 2 3 4 5 6 7 8 86-21******** Extension:
1 2 3 4 5 6 7 8 Fax Number 86-21********
1 2 3 4 5 6 7 8 E-mail y******@ecit.org.cn
app
s Non Technical Contact n/a app
s Confidentiality (long or short term) 1 2 3 4 5 6 7 8 Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes 1 2 3 4 5 6 7 8 Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app
s Cognitive Radio & Software Defined Radio, Class, etc 1 2 3 4 5 6 7 8 Is this application for software defined/cognitive radio authorization? No 1 2 3 4 5 6 7 8 Equipment Class PCB — PCS Licensed Transmitter 1 2 3 4 5 6 7 8 JBP — Part 15 Class B Computing Device Peripheral 1 2 3 4 5 6 7 8 DSS — Part 15 Spread Spectrum Transmitter 1 2 3 4 5 6 7 8 NII — Unlicensed National Information Infrastructure TX 1 2 3 4 5 6 7 8 DTS — Digital Transmission System 1 2 3 4 5 6 7 8 DXX — Part 15 Low Power Communication Device Transmitter 1 2 3 4 5 6 7 8 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) Smart POS system 1 2 3 4 5 6 7 8 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? No 1 2 3 4 5 6 7 8 Modular Equipment Type Does not apply 1 2 3 4 5 6 7 8 Purpose / Application is for Class II Permissive Change 1 2 3 4 5 6 7 8 Original Equipment 1 2 3 4 5 6 7 8 Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? Yes 1 2 3 4 5 6 7 8 Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? No 1 2 3 4 5 6 7 8 Grant Comments Power output is ERP for Part 22 and EIRP for Part 24 and Part 27. End users must be informed of the body-worn
requirements for satisfying RF Exposure compliance. The highest reported SAR for body-worn
accessory, simultaneous transmission, and extremity (hand) exposure conditions are 1.31 W/kg, 1.48 W/kg
and 1.80 W/kg, respectively.

This device contains GSM/WCDMA/CDMA2000/LTE functions that are not operational in U.S. Territories. This
filing is only applicable for 700 MHz SMH, 850 MHz Cell, 1700 MHz AWS, 1900 MHz PCS , 2600 MHz IMT
operations.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Band 2 and
4; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7 and 5 MHz and 10 MHz bandwidth
modes for LTE Band 17.

This device also contains Bluetooth, BLE, NFC, WLAN 2.4G and WLAN 5GHz transmitters.

Class II Permissive Change: Software and hardware modification please see the detail information described in the filing. 1 2 3 4 5 6 7 8 This device also contains Bluetooth, BLE, NFC, WLAN 2.4GHz, WLAN 5GHz and
GSM/CDMA2000/WCDMA/LTE transmitters.

Class II Permissive Change: Software and hardware modification please see the detail information described in the filing. 1 2 3 4 5 6 7 8 Power output listed is conducted. End-users must be provided with transmitter
operating conditions for satisfying RF exposure compliance.

This device also contains BLE, NFC, WLAN 2.4GHz, WLAN 5GHz and GSM/CDMA2000/WCDMA/LTE transmitters. 1 2 3 4 5 6 7 8 Power Output listed is conducted. The highest reported SAR for
body-worn accessory, simultaneous transmission, and extremity (hand) exposure
conditions are 0.25 W/kg, 1.48 W/kg and 0.29 W/kg, respectively.

This device also contains BT, BLE, NFC, WLAN 2.4GHz and GSM/CDMA2000/WCDMA/LTE transmitters.

This device supports 20 MHz and 40 MHz BW modes. 1 2 3 4 5 6 7 8 Power output is conducted. End-users must be provided with transmitter
operating conditions for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous
transmission, and extremity (hand) exposure conditions are 0.21 W/kg, 1.48 W/kg and 0.29 W/kg, respectively.

This device also contains Bluetooth, NFC, WLAN 5GHz and GSM/CDMA2000/WCDMA/LTE transmitters.

This device has a 20 MHz and 40 MHz bandwidth mode in 2.4G WLAN transmitter. 1 2 3 4 5 6 7 8 This device also contains Bluetooth, BLE, NFC, WLAN 2.4GHz, WLAN 5GHz and GSM/CDMA2000/WCDMA/LTE transmitters. 1 2 3 4 5 6 7 8 Power output is ERP for Part 22 and EIRP for Part 24 and Part 27. End users must be informed of the body-worn requirements for satisfying RF Exposure compliance. The highest reported SAR for
body-worn accessory, simultaneous transmission, and extremity (hand) exposure
conditions are 1.31 W/kg, 1.48 W/kg and 1.80 W/kg, respectively.

This device contains GSM/WCDMA/CDMA2000/LTE functions that are not operational in U.S. Territories. This filing is only applicable for 700 MHz SMH, 850 MHz Cell, 1700 MHz AWS, 1900 MHz PCS , 2600 MHz IMT operations.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15MHz and 20 MHz bandwidth modes for LTE Band 2 and 4; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 7 and 5 MHz and 10 MHz bandwidth modes for LTE Band 17.

This device also contains Bluetooth, BLE, NFC, WLAN 2.4G and WLAN 5GHz transmitters. 1 2 3 4 5 6 7 8 Is there an equipment authorization waiver associated with this application? No 1 2 3 4 5 6 7 8 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? No app
s Test Firm Name and Contact Information 1 2 3 4 5 6 7 8 Firm Name East China Institute of Telecommunications
1 2 3 4 5 6 7 8 Name Z**** Z****
1 2 3 4 5 6 7 8 Telephone Number 86-21********
1 2 3 4 5 6 7 8 E-mail z******@ecit.org.cn